Dadex Nikasi upvc Elbow 45 degree 75mm

Description

upvc Elbow 75mm 45 degree

 

local Manufacturer Suppliers in Islamabad Pakistan Contact 0322-3540656 uPvc  Pressure Fittings, Drain sewer ventilation

 

What is Dadex Nikasi upvc Elbow 45 degree 75mm ?

 

The Dadex Nikasi UPVC 45-degree Elbow (75mm) is a versatile drainage fitting available in two primary joining methods: Solvent Weld (chemical bonding) and Rubber Ring/Push-Fit (mechanical seal).

---

1. Product Description

The 45-degree elbow allows for a gradual change in the direction of a pipeline.

• The Solvent Joint version features a smooth internal socket for permanent bonding.

• The Push-Fit version includes a groove with a factory-fitted rubber EPDM ring, allowing for thermal expansion and contraction.

---

2. Technical Specifications

Dadex Nikasi is manufactured to resist the harsh environmental conditions of Pakistan, including high UV exposure and varying soil chemistry.

Feature	Specification Detail
Material	Unplasticized Polyvinyl Chloride (UPVC) – Lead-Free
Diameter	75 mm (Standard for bathroom/kitchen waste)
Joint Options	Solvent Cement or Push-Fit (Z-Joint)
Standard Compliance	BS 4514 / PS 3214 (SWR Standards)
Color	Light Grey / White
Wall Thickness	Designed to withstand underground soil pressure and impact

---

3. Usage: Drain, Sewer, and Ventilation

The 75mm 45-degree elbow is the “workhorse” of residential plumbing:

• Drain & Sewer: Used to transition horizontal waste lines into vertical stacks. The 45-degree angle prevents “sludge buildup” that common 90-degree bends often cause.

• Ventilation: Essential for Vent Stacks. It routes air through the plumbing system to prevent vacuum siphoning (which sucks water out of traps/p-traps) and allows sewer gases to exit safely at the roofline.

• Rainwater: Used in downspouts to navigate around building cornices or architectural features.

---

4. Installation: Solvent Joint vs. Push-Fit

A. Solvent Joint Installation (Permanent)

1. Prep: Clean the pipe end and the inside of the elbow with a dry cloth.

2. Apply: Use Dadex UPVC Solvent Cement. Apply a thin layer to the fitting and a thicker layer to the pipe.

3. Insert: Push the pipe into the 45° elbow and give it a 1/4 turn to distribute the cement.

4. Hold: Hold for 30 seconds. Do not move for 5 minutes.

B. Push-Fit/Rubber Ring Installation (Flexible)

1. Chamfer: The pipe end must be beveled (chamfered at 15°) to avoid tearing the rubber ring.

2. Lubricate: Apply a thin layer of Dadex Rubber Lubricant (do not use oil or grease) to the pipe end and the ring.

3. Insert: Push the pipe into the socket until it hits the stop, then pull it back about 10mm. This “gap” allows the pipe to expand and contract during hot/cold weather without cracking.

---

5. Key Advantages

• Mirror Smooth Interior: Prevents scaling and internal blockages.

• Corrosion Proof: Unlike cast iron or GI pipes, UPVC will not rust or react with acidic waste.

   

• Lead-Free: Environmentally friendly and safer for handlers.

• High Flow Rate: The 45-degree geometry maintains high velocity for solids in the sewer line.

---

Comparison Summary

Feature	Solvent Joint	Push-Fit (Z-Joint)
Installation Speed	Moderate (Wait for glue)	Fast (Immediate)
Expansion Handling	Poor (Requires expansion joints)	Excellent (Built-in)
Ease of Repair	Hard (Must cut pipe)	Easy (Can be disassembled)
Best For	Internal high-vibration areas	Underground or long vertical stacks