Description
Upvc pipe 200mm
Dadex local Suppliers Distributor Manufacturer online shop uPvc pipes Drain sever ventilation Contact 0322-3540656
What is Dadex Nikasi Upvc pipe 200mm ?
manufactures the Dadex Nikasi uPVC Pipe 200mm (8 inch) as part of its drainage, sewerage, soil, waste, and vent (SWV) piping system.
Description
The 200mm Dadex Nikasi uPVC Pipe is a large-diameter drainage pipe made from un plasticized polyvinyl chloride (uPVC). It is engineered to transport wastewater, sewage, rainwater, and ventilation air with minimal blockage risk. The smooth internal surface improves flow efficiency and reduces sediment buildup.
Main Features
- High-impact rigid uPVC construction
- Corrosion-resistant and rust-free
- Resistant to many acids, alkalis, and chemicals found in wastewater
- Lightweight compared to cast iron and concrete pipes
- Smooth bore for improved hydraulic flow
- UV-stabilized grey finish for outdoor use
- Low maintenance requirements
- Long service life, often exceeding 50 years under proper installation conditions
Technical Specifications
| Property | Specification |
|---|---|
| Product Type | uPVC Soil, Waste & Vent (SWV) Pipe |
| Brand | Dadex Nikasi |
| Nominal Size | 200mm (8 inch) |
| Material | Un plasticized Polyvinyl Chloride (uPVC) |
| Color | Grey |
| Standard Lengths | 3m and 4m |
| Joint Types | Solvent Cement Joint or Rubber Ring Joint |
| Application | Drainage, Sewerage, Ventilation |
| Pressure Rating | Non-pressure (Gravity Flow) |
| Standards | ISO 3633:2002(E), EN 1329:1999, PS 3214:1992 |
| Installation Type | Above-ground and underground drainage systems |
Standards Compliance
Dadex Nikasi pipes are manufactured according to:
- ISO 3633:2002(E)
- EN 1329:1999
- Pakistan Standard PS 3214:1992
- PSQCA-certified production system
Installation Method
Solvent Cement Joint
- Cut pipe squarely.
- Remove burrs from pipe edges.
- Clean pipe and fitting surfaces.
- Apply approved uPVC solvent cement evenly.
- Insert pipe fully into socket with a slight twisting motion.
- Hold for several seconds.
- Allow adequate curing time before testing.
Rubber Ring Joint
- Ensure gasket is properly seated.
- Clean spigot and socket.
- Apply approved lubricant.
- Push pipe into socket up to insertion mark.
- Verify alignment and slope.
Typical Uses of 200mm Dadex Nikasi Pipe
Building Sewer Lines
- Main drainage lines in apartments, plazas, hospitals, and commercial buildings.
Underground Sewerage Networks
- Transporting wastewater from buildings to municipal sewer systems.
Stormwater Drainage
- Large roof drainage collectors and rainwater disposal systems.
Industrial Wastewater Drainage
- Suitable for many industrial drainage applications involving non-aggressive effluents.
Ventilation Systems
- Large vent stacks for maintaining proper air circulation within drainage systems.
Advantages
- Excellent chemical resistance
- No corrosion or scaling
- Smooth internal flow surface
- Lower installation cost than metal pipes
- Easy transportation due to low weight
- Leak-resistant jointing systems
- Suitable for concealed, exposed, and underground installations
- Long operational life with minimal maintenance
Important Note
The Dadex Nikasi 200mm pipe is a drainage and sewerage pipe, not a pressure pipe. It should not be used for:
- Hot water supply
- Cold water pressure supply
- HVAC chilled water pressure lines
- Fire-fighting pressure systems
Reviews
There are no reviews yet.