Description
upvc End Cap 2″
GM made in Pakistan ASTM uPvc Sch-40 Pressure Fittings, Drain sewer ventilation dealer distributor online contact 0322-3540656
What is upvc End Cap 2″ GM ?
A 2″ UPVC Schedule 40 End Cap is a durable fitting designed to seal the end of a 2-inch UPVC pipe in high-pressure systems. Made from un plasticized PVC, it offers high tensile and impact strength, suitable for pressures typically up to 140°F. It conforms to Schedule 40 standards, meaning it has a specific wall thickness for pressure handling.
Specifications generally include:
- Size: 2 inches nominal diameter
- Material: UPVC (un plasticized PVC)
- Pressure rating: Suitable for high-pressure applications, often rated for potable water and chemical transport
- Temperature limit: Up to 140°F (60°C)
- Standards: ASTM D2466 or equivalent for pressure fittings
Description: The end cap is a socket-type fitting that fits over the pipe end, creating a secure, leak-proof seal when joined with primer and solvent cement. It prevents fluid flow beyond the pipe end, protecting the system from contamination or damage.
Usage: Commonly used to close off pipe ends in water supply, irrigation, chemical processing, and other industrial piping systems where pressure containment is critical.
Installation:
- Clean and dry the pipe end and inside of the end cap.
- Apply PVC primer to both surfaces to soften and prepare them.
- Apply solvent cement evenly on both the pipe end and inside the cap.
- Quickly insert the pipe into the cap with a twisting motion to ensure even distribution.
- Hold firmly for a few seconds to allow initial bonding.
- Allow the joint to cure as per cement manufacturer’s instructions before pressurizing the system.
This fitting is easy to install and provides a reliable seal for high-pressure UPVC piping systems.
2″ UPVC Schedule 40 End Cap – Detailed Information
Specifications
- Size: 2 inches nominal diameter
- Material: UPVC (Un plasticized Polyvinyl Chloride)
- Pressure Rating: Typically up to 280 psi (varies by manufacturer)
- Temperature Limit: Maximum working temperature of 140°F (60°C)
- Standards Compliance: ASTM D1784, ASTM D2466, NSF 14 and 61
- Connection Type: Socket (solvent cemented)
- Schedule: 40 (standard wall thickness for pressure applications)
- Color: Usually white with red print (varies by brand)
- Weight: Approximately 0.189 lb per fitting
- Compatibility: Designed for use with PVC Schedule 40 pressure pipe
Description
- The 2″ UPVC Schedule 40 End Cap is a socket-type fitting designed to seal the open end of a 2-inch UPVC pipe.
- It is molded from high-quality UPVC, providing excellent tensile strength and impact resistance.
- The smooth interior surface reduces friction loss and prevents scaling or contamination buildup.
- It is intended for use in pressure systems such as irrigation, underground sprinkler systems, swimming pools, and cold water supply lines.
- The fitting is designed to withstand pressures typical in potable water and chemical transport systems, but it is not recommended for compressed air or gas systems.
Usage
- Used to close off the end of a UPVC pipe run to prevent fluid flow beyond the pipe end.
- Common in irrigation systems, water supply lines, chemical processing, and outdoor plumbing applications.
- Suitable for underground use due to its resistance to soil contaminants.
- Provides a secure, leak-proof seal in high-pressure piping systems.
- Can be used in DIY projects such as building frameworks or protective covers where pipe ends need to be safely capped.
Installation Instructions
- Preparation:
- Ensure the pipe end and inside of the end cap are clean, dry, and free from dirt or grease.
- Priming:
- Apply PVC primer to the outside of the pipe end and the inside of the end cap to soften the surfaces.
- Solvent Cement Application:
- Apply an even coat of solvent cement to both primed surfaces.
- Assembly:
- Quickly insert the pipe end into the cap with a slight twisting motion to evenly distribute the cement.
- Setting:
- Hold the joint firmly for about 15-30 seconds to prevent push-out.
- Curing:
- Allow the joint to cure according to the solvent cement manufacturer’s instructions (usually 15 minutes for handling, 2 hours for full cure).
- Testing:
- After curing, test the system under pressure to ensure a leak-free seal.
Reviews
There are no reviews yet.