pipe 1-1/2″ sch-40 gm upvc 4meter

Description

pipe 1-1/2″ sch-40

 

GM local manufacturing Made in Pakistan. Upvc Pipes and fittings for water, drain, sewer & ventilation BSS-3505 class E contact 0322-3540656

 

What is pipe 1-1/2″ sch-40 gm upvc 4meter ?

 

1-1/2″ Schedule 40 GM UPVC Pipe Overview
1-1/2″ Schedule 40 GM UPVC pipe refers to un plasticized polyvinyl chloride (UPVC) piping with a nominal size of 1-1/2 inches, designed for cold water pressure applications up to 15 bar, often imported from regions like Saudi Arabia and meeting ASTM D-1785 standards. This pipe features an outside diameter of 1.90 inches, inside diameter of 1.590 inches, and wall thickness of 0.145 inches, making it suitable for lightweight, corrosion-resistant installations. It is typically white in color, environment-friendly, and rated for maximum operating temperatures around 60°C (140°F).​

Key Specifications pipe 1-1/2″ sch-40 gm upvc

4meter

• Dimensions: OD 1.900″, ID 1.590″, wall thickness 0.145″ (Schedule 40 series).​

• Pressure Rating: Approximately 330-370 psi at 73°F, depending on exact standards; AGM variant handles 15 bar for cold water.​

• Material and Standards: UPVC (chlorinated polyvinyl chloride), ASTM D-1785 compliant, NSF approved for potable water in some variants.​

• Length: Commonly supplied in 4-6 meter lengths.​

Installation Guidelines
Solvent weld joints are standard: clean pipe and fitting ends, apply PVC primer then cement, insert fully, and hold for 30 seconds per inch of diameter; belled ends facilitate alignment.

Usage Applications
Ideal for cold water supply lines, drainage, and non-pressurized irrigation in plumbing, HVAC, and industrial setups; not for hot water above 60°C or sustained high pressures. Its chemical resistance suits agricultural and light chemical transport, while lightweight design eases handling compared to metal pipes. Avoid direct sunlight exposure without UV-stabilized variants and confirm food-grade certification for potable use.