saudi-arab-upvc-pipe-sdr-series-schedule-series-1/2"-3/4"-1"-1-1/4"-1-1/2"-2"-3"-4"-5"-6"-8"-10"

Saudi Arab upvc pipe 1″ sch40

Euro Gulf upvc pipe 1″ sch40, Euro Gulf , pakistan. ASTM uPvc pipes sch-40 : BSS-3505 class E.

Category: Tags: , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,

Description

Euro Gulf upvc pipe 1″ sch40

 

Euro Gulf local Suppliers in Karachi Contact 0321-2248975 uPvc pipes sch-40 (E-class) Suppliers in Karachi Contact 0321-2248975

 

What is Saudi Arab upvc pipe 1″ sch40 ?

 

Here’s the detailed information about 1″ Schedule 40 UPVC pipe from Saudi Arabia for HVAC and water supply applications:

Key Fact Upfront

UPVC 1″ Sch40 is suitable for cold water supply and HVAC condensate drainage, but NOT for hot water — for hot water, you need CPVC instead.

Specifications for 1″ UPVC Sch40 Pipe

Parameter Value
Nominal Size 1 inch (DN25)
Outside Diameter (OD) 33.4 mm (1.315 inches)
Wall Thickness 3.38 mm (0.133 inches)
Inner Diameter ~26.6 mm (1.029 inches)
Weight ~0.333 lbs/ft (0.5 kg/m)
Color White
Schedule 40 (moderate pressure)
Pressure Rating 450 PSI (31.6 bar) at 23°C
Max Temperature 60°C (140°F) — cold water only
Length 6 meters (20 feet) standard
Connection Type Solvent weld (socket)
Standards ASTM D1785, ASTM D2466, SASO/ISO

Description & Material Properties

  • Material: Un plasticized Polyvinyl Chloride (rigid PVC without plasticizers)

  • Key Features:

    • Corrosion & rust-resistant

    • Lightweight and easy to install

    • Smooth inner surface (minimizes friction/buildup)

    • Chemical-resistant (acids, alkalis, salts)

    • Low thermal conductivity

    • Service life: 50+ years under normal conditions

    • UV-resistant (suitable for outdoor use)

Applications & Usage

Application Suitability Details
Cold Water Supply ✅ Excellent Potable water distribution, plumbing
Hot Water Supply ❌ NOT suitable Use CPVC instead (UPVC max 60°C)
HVAC Condensate Drain ✅ Excellent Air conditioning condensate lines
HVAC Chilled Water ✅ Good Non-hot water HVAC lines
Sewerage/Drainage ✅ Excellent Gravity-fed waste lines
Ventilation ✅ Good Drain/vent systems

Installation Guidelines (Saudi Arabia Standards)

1. Cutting & Preparation

  • Use PVC pipe cutter or fine-tooth saw

  • Cut squarely (straight, 90° cut)

  • Remove burrs with sandpaper/deburring tool

2. Cleaning

  • Wipe pipe ends with clean, dry cloth

  • Ensure joints are completely dry before cementing

  • Use approved PVC/uPVC primer

3. Solvent Welding

  • Apply PVC/uPVC solvent cement evenly on both pipe and fitting

  • Insert pipe fully into fitting

  • Rotate slightly (¼ turn) for even distribution

  • Hold for a few seconds to set

4. Support & Spacing

  • Use proper pipe supports/clamps (corrosion-resistant)

  • Add extra supports near elbows and fittings

  • For horizontal condensate pipes: slope 1/100 (1 cm per meter)

5. Expansion & Curing

  • Install expansion joints for long pipelines

  • Allow full curing time (especially important in Saudi heat)

  • Conduct gradual pressure testing after curing

6. Saudi-Specific Considerations

  • Use solvent cement suitable for Saudi standards (SASO)

  • Account for high ambient temperatures during curing

  • Select pipe class based on municipal water pressure requirements

Important Limitations

Limitation Detail
Temperature Max 60°C (140°F) — not for hot water
Hot Water Alternative Use CPVC Sch40 (handles up to 93°C/200°F)
Cold Brittle Can become brittle below -10°C
Compressed Air Not for compressed air/gas (max 25 PSI oil-free only)
Strong Solvents Avoid acetone and strong solvents

Saudi Brands & Suppliers

  • AGM — Imported from Saudi Arabia, ASTM Sch-40, 15 Bar pressure rating

  • AL Watania — Saudi specifications, ISO standards, 6m lengths

  • SIP (Saudi Industries for Pipes) — SASO certified, produces according to ASTM/SASO standards

Reviews

There are no reviews yet.

Be the first to review “Saudi Arab upvc pipe 1″ sch40”

Related products