Description
PPR Pipe 20mm
EG PPRc pipes and fittings local ,, Food Grade, Plumbing Materials, Manufacturer Suppliers in karachi Contact 0321-2248975,
What is PPR Pipe 20mm EG euro gulf ?
PPR Pipe 20mm EG Euro Gulf PN20 refers to the 20 mm outer diameter Polypropylene Random Copolymer (PPR or PPR-C) pipe manufactured by Euro Gulf Industries (a leading Pakistani pipe manufacturer based in Pakistan), pressure class PN20. This is a high-quality, green or white colored pipe designed primarily for hot and cold potable water supply, as well as chilled water systems in HVAC (Heating, Ventilation, and Air Conditioning) applications. It is part of the EG PPR-C complete piping system, which conforms to international quality and safety standards.
Euro Gulf Industries specializes in polymer pipes including PPR-C for hot/cold water, chilled water, and even compressed air distribution in residential, commercial, and industrial settings in Pakistan.
Description
PPR (Polypropylene Random Copolymer) pipes are thermoplastic pipes made from high-purity random copolymer polypropylene granules. The PN20 class indicates a high-pressure rating suitable for demanding hot water and heating systems. The “EG” branding stands for Euro Gulf, a trusted local brand known for durable, corrosion-free piping solutions.
Key Features:
- Excellent resistance to high temperatures and pressure.
- Non-toxic, hygienic (no leaching, suitable for drinking water).
- Corrosion-proof, no rust or scaling.
- Smooth inner surface for low friction and high flow rates.
- Lightweight, easy to transport and install.
- Long service life (minimum 50 years under normal conditions).
- Environmentally friendly and recyclable.
- Good chemical resistance and thermal insulation properties.
It is ideal where metal pipes would corrode or where hygiene and longevity are priorities.
Specifications
| Parameter | Details |
|---|---|
| Material | Random Copolymer Polypropylene (PPR / PP-R Type 3) |
| Brand | Euro Gulf (EG PPR-C) |
| Nominal Outer Diameter | 20 mm |
| Pressure Rating (PN) | PN20 (20 bar at 20°C) |
| SDR (Standard Dimension Ratio) | SDR 6 (S 2.5 series) |
| Wall Thickness | Approximately 3.4 mm (typical for 20mm PN20) |
| Internal Diameter | Approximately 13.2 mm (approx., depending on exact wall) |
| Length | Standard straight lengths: 4 meters (common in market) |
| Color | Typically green (for hot/cold water identification) or white |
| Standards Compliance | DIN 8077/8078, EN ISO 15874, and relevant Pakistani/international norms for PPR systems |
| Temperature Range | Continuous: up to 70–95°C (hot water); Short-term peaks: up to 95–110°C |
| Pressure Derating | 20 bar at 20°C (cold); ~10 bar at 70°C; ~6–8 bar at 95°C (typical for PN20) |
| Applications | Hot & cold potable water supply, central heating, floor heating, HVAC chilled water lines, industrial piping |
| Advantages | Leak-proof fused joints, no electrolysis, low thermal expansion coefficient (~0.15 mm/m·K) |
These specs make it suitable for pressurized hot water systems (unlike lower PN classes like PN10 or PN16, which are thinner-walled and for lower pressure/temperature).
Installation
PPR pipes use heat fusion welding (socket fusion or butt fusion) for permanent, leak-proof joints—no threads, glue, or gaskets needed.
Tools and Materials Needed:
- PPR pipe cutter
- Pipe reamer/deburring tool
- Heating tool (electric socket welder with dies for 20mm)
- Measuring tape, marker
- Support clamps
- Compatible Euro Gulf PPR fittings (elbows, tees, couplings, etc.)
Steps:
- Cut the pipe squarely to length using a sharp cutter (avoid saws that create burrs).
- Deburr and clean the pipe end and fitting socket (remove dust/oil).
- Mark insertion depth on the pipe (usually 13–14 mm for 20mm size).
- Heat the pipe end and fitting socket simultaneously on the welding machine (temperature ~260–270°C, heating time ~5–8 seconds for 20mm).
- Insert the heated pipe into the fitting quickly and hold firmly for 5–10 seconds (cooling time ~2 minutes before handling).
- Align properly—no twisting after insertion.
- Support pipes adequately: horizontal runs every 0.5–1 m (use clips); vertical every 1–2 m. Allow for thermal expansion (use expansion loops or compensators in long runs).
- Test the system hydrostatically (pressure test at 1.5× working pressure) before commissioning.
Tips:
- Work in a clean, dry area; avoid contamination.
- Use only matching PPR fittings (same brand/class for best results).
- For HVAC/chilled water: insulate pipes to prevent condensation.
- Follow local plumbing codes and Euro Gulf guidelines.
Usage
- Hot & Cold Water Supply: Ideal for domestic plumbing (kitchens, bathrooms), high-rise buildings, hotels—handles hot water up to 95°C without degradation.
- HVAC Systems: Used for chilled water distribution, fan coil units, air handling units—resistant to condensation and corrosion.
- Central Heating & Radiant Floor Heating: Excellent thermal properties for underfloor systems.
- Other: Compressed air lines, industrial process water (non-aggressive chemicals).
Limitations:
- Not for gas distribution or extremely aggressive chemicals.
- Avoid direct flame exposure or temperatures >110°C.
- Protect from prolonged UV if installed outdoors (use covers).
- Requires skilled welding—poor joints can leak under pressure.
Reviews
There are no reviews yet.