Euro Gulf upvc Socket 1-1/4″

Description

upvc Socket 1-1/4″

 

Euro Gulf local Suppliers online shop in Karachi Pakistan Contact 0321-2248975 ASTM uPvc Sch-40 Pressure Fittings, Drain sewer ventilation

 

What is Euro Gulf upvc Socket 1-1/4″ ?

 

Euro Gulf UPVC Socket 1-1/4″ Schedule 40 is a plumbing fitting designed for connecting unplasticized PVC pipes in HVAC systems and hot/cold water supply lines. It’s commonly used in regions like Pakistan for durable, corrosion-resistant installations in building infrastructure.

Description

This socket fitting features a socket-end connection on both sides for joining two 1-1/4″ (32mm nominal) Schedule 40 UPVC pipes end-to-end in a straight line. Made from rigid unplasticized polyvinyl chloride (UPVC), it provides strength, chemical resistance, and lightweight handling suitable for water conveyance, drainage, or HVAC ducting/condensate lines. It’s typically white in color and produced by Euro Gulf or similar Middle Eastern/Pakistani brands for compliance with local standards like ASTM D2466.

Specifications

• Size: 1-1/4″ (32mm outer diameter compatibility).

• Schedule: 40 (medium wall thickness, pressure-rated ~150-230 psi at 73°F/23°C, derating at higher temps).

• Material: UPVC/PVC, NSF-compliant for potable water in many cases.

• Temperature Range: Up to 140°F (60°C) max; suitable for cold water primary, limited hot water.

• Standards: ASTM D1784/D2466, BS EN 1401, or MS 1063 equivalents; lead-free options available.

Installation

Clean pipe ends and socket interior, then apply PVC primer followed by solvent cement (e.g., Christchurch type) using a dauber. Insert pipe fully into socket, hold for 30 seconds, and allow 24-hour cure time before pressure testing. Use in ambient temperatures above 40°F (5°C); avoid over-tightening or mismatched schedules. For HVAC, ensure compatibility with condensate or low-pressure air lines only—no compressed gases.

Usage

Ideal for HVAC condensate drainage, cold/hot water supply (non-potable hot limited), soil/waste vents, and irrigation in residential/commercial builds. Not for high-pressure gas, hot water beyond 140°F, or direct hot water distribution without verification. Pairs well with Euro Gulf UPVC pipes for solvent-weld joints in Pakistani projects.