AGM upvc Tee 1/2″

Description

 upvc tee 1/2″

 

AGM imported from Saudi Arab ASTM uPvc Sch-40 Pressure Fittings, Drain sewer ventilation. imported material distributor contact 0322-3540656

 

What is AGM upvc Tee 1/2″ ?

 

The AGM UPVC Tee (1/2″ Schedule 40) is a high-quality plumbing fitting manufactured by Arabian Gulf Manufacturers (AGM) in Saudi Arabia.¹ It is widely recognized in the Middle East and international markets for its durability and compliance with strict ASTM (American Society for Testing and Materials) standards.

1. Description

A “Tee” fitting is shaped like the letter T and is used to create a 90-degree branch from a main pipeline.³ This specific model is made from Un plasticized Polyvinyl Chloride (UPVC), which is a rigid, lead-free plastic that does not corrode or rust.

---

2. Technical Specifications

Feature	Details
Brand	AGM (Arabian Gulf Manufacturers, Saudi Arabia)
Material	UPVC (Lead-free, non-toxic)
Size	1/2 inch (Nominal Diameter)
Schedule	Schedule 40 (Standard wall thickness for pressure/drainage)
Standards	ASTM D2466 (Fittings) & ASTM D2665 (Drain/Waste/Vent)
Pressure Rating	Typically rated for approx. 600 PSI at 23°C (varies by system design)
Color	Generally White (standard for Sch 40)
Joint Type	Solvent Weld (requires PVC glue)

---

3. Usage & Applications

Despite its small 1/2″ size, this fitting is versatile across different systems:

• Water Supply: Used in residential and commercial cold-water plumbing. Its lead-free composition makes it safe for potable (drinking) water.

• HVAC Systems: Commonly used in condensate drain lines for air conditioning units to carry away moisture.

• Sewerage/Drainage: While 1/2″ is small for main sewage, specialized drainage, laboratory waste, or vent piping (DWV) use it.

• Industrial: Transporting chemicals or fluids that are corrosive to metal pipes.

---

4. Installation Steps

Proper installation ensures a leak-proof “solvent weld” bond where the plastic surfaces actually fuse together.

1. Cutting: Cut the pipe square and remove all burrs (rough edges) using sandpaper or a deburring tool.

2. Cleaning: Wipe the outside of the pipe and the inside of the Tee socket to remove dust and oil.

3. Priming: Apply a PVC Primer to both surfaces.⁸ This softens the plastic for a better bond.

4. Gluing: Apply a thin, even layer of PVC Solvent Cement to the pipe end and the Tee socket.

5. Assembly: Insert the pipe into the Tee quickly, give it a 1/4 turn to spread the glue, and hold it firmly for 30 seconds.

6. Curing: Wait at least 15–30 minutes before handling and 24 hours before fully pressurizing the system.

---

5. Why Choose “Imported from Saudi Arab”?

AGM is one of the oldest plastic manufacturers in the region (est.¹⁰ 1965). Fittings imported from Saudi Arabia are often preferred because they are:

• Heat Resistant: Designed for high ambient temperatures.

• Strict Quality Control: Manufactured to meet both Saudi (SASO) and International (ASTM) standards.

• Chemical Resistance: Highly resistant to the salts and minerals often found in local water supplies.

​