Description
upvc socket 3/4″
AGM imported from Saudi Arab ASTM uPvc Sch-40 Pressure Fittings, Drain sewer ventilation. dealer in Pakistan contact 0322-3540656
What is AGM upvc Socket 3/4″ ?
The AGM UPVC Socket 3/4″ SCH 40 is a pressure-rated coupling fitting made of un plasticized polyvinyl chloride (UPVC), imported from Saudi Arabia. It is designed for connecting two UPVC pipes in water supply, drainage, and sewerage systems, manufactured under ASTM standards for durability and chemical resistance.
📘 Product Description
- Material: Unplasticized Polyvinyl Chloride (UPVC)
- Brand: AGM (Saudi Arabia origin)
- Type: Socket / Coupling fitting
- Size: 3/4 inch (nominal bore)
- Standard: ASTM SCH 40 (Schedule 40 pressure rating)
- Color: White
- Application: Plumbing water supply, drain, sewer, and ventilation systems
⚙️ Specifications
| Feature | Details |
|---|---|
| Size | 3/4 inch nominal bore |
| Pressure Rating | SCH 40 ASTM standard |
| Material | UPVC – rigid, corrosion-resistant |
| Usage | Water supply, sewerage, drainage |
| Origin | Imported from Saudi Arabia |
| Color | White finish |
| Compatibility | Fits UPVC pipes of same schedule |
Sources:
🛠️ Installation Guide
- Preparation
- Cut pipe ends squarely and clean thoroughly.
- Ensure socket and pipe are free of dust, grease, or moisture.
- Solvent Cement Application
- Apply UPVC solvent cement evenly on both pipe end and inside of socket.
- Avoid excessive cement to prevent blockage.
- Joining
- Insert pipe into socket immediately while rotating slightly for even spread.
- Hold in place for 30 seconds to allow bonding.
- Curing
- Allow joint to set for at least 15 minutes before handling.
- Full curing may take 24 hours depending on temperature and humidity.
💡 Usage & Applications
- Water Supply Lines: Domestic and commercial plumbing systems.
- Sewerage & Drainage: Wastewater discharge, vent lines, and underground sewerage.
- Industrial Use: Chemical-resistant pipelines for non-corrosive fluids.
- HVAC & AC Drainage: Commonly used in air-conditioning condensate drain lines.
⚠️ Key Considerations & Risks
- Pressure Limitations: SCH 40 fittings are suitable for moderate pressure; not for high-pressure industrial use.
- Temperature Sensitivity: UPVC is not recommended for hot water above 60°C.
- Proper Cementing: Weak joints occur if solvent cement is not applied correctly.
- Compatibility: Must match pipe schedule (SCH 40) to avoid leakage.
Reviews
There are no reviews yet.