AGM upvc Socket 1″

Description

upvc socket 1″

 

AGM imported from Saudi Arab ASTM uPvc Sch-40 Pressure Fittings, Drain sewer ventilation. distributor in Pakistan contact 0322-3540656

 

What is AGM upvc Socket 1″ ?

 

Description

The AGM UPVC Socket 1″ Sch 40 is a straight coupling (also called a coupler or socket) fitting manufactured by Arabian Gulf Manufacturers Ltd. (AGM), a Saudi Arabian company based in Jeddah. It is made from un plasticized polyvinyl chloride (UPVC), a rigid, durable plastic material known for its corrosion resistance, lightweight properties, and smooth inner walls that promote efficient flow.

This fitting connects two 1-inch (nominal size) UPVC pipes end-to-end using solvent cement jointing. AGM’s Sch 40 series is dual-rated for both pressure applications (potable water supply) and non-pressure applications (drainage, waste, vent, or sewerage), making it versatile for plumbing systems.

AGM products are widely exported (e.g., to Pakistan) and comply with international standards, using high-quality raw materials like those from SABIC.

Specifications

• Manufacturer: Arabian Gulf Manufacturers Ltd. (AGM), Jeddah, Saudi Arabia
• Material: UPVC (Un plasticized Polyvinyl Chloride)
• Size: 1″ (nominal diameter; actual outside diameter ≈ 1.315″ or 33.4 mm)
• Schedule: Sch 40 (wall thickness ≈ 0.133″ or 3.38 mm for 1″ pipe/fitting)
• Standards: ASTM D2466 (for fittings), ASTM D1785 (pressure pipes), ASTM D2665 (DWV – drain, waste, vent)
• Color: Typically white or gray
• Joint Type: Solvent weld socket (both ends)
• Max Operating Temperature: Up to 60°C (140°F)
• Pressure Rating: Suitable for moderate pressure (e.g., cold water supply; exact PSI varies by temperature but aligns with Sch 40 ratings, around 280-450 PSI at room temperature for 1″ size)
• Applications: Dual-rated for potable water supply (pressure) and sewerage/drainage (non-pressure/DWV)

Usage

This socket is ideal for:

• Water Supply: Cold potable water distribution in residential, commercial, and industrial plumbing.
• Sewerage and Drainage: Non-pressure systems for waste, vent, sewer lines, and storm water due to its chemical and corrosion resistance.
• Other uses: Irrigation, HVAC drain lines, or conduits (with compatible pipes).

It is commonly used where moderate durability and pressure handling are needed, resisting chemicals, acids, salts, and biological growth.

Installation

AGM UPVC Sch 40 fittings use solvent cement welding for permanent, leak-proof joints:

1. Preparation — Cut the pipe ends square using a pipe cutter. Remove burrs and chamfer edges. Clean the pipe ends and fitting sockets with a cloth to remove dirt, moisture, or oils.
2. Dry Fit — Test-fit the pipes into the socket for proper alignment.
3. Apply Solvent Cement — Use approved UPVC primer (optional but recommended) followed by solvent cement. Apply cement evenly to both the pipe end and socket interior.
4. Assembly — Quickly insert the pipe fully into the socket with a quarter-turn twist to distribute cement evenly. Hold firmly for 10-30 seconds to set.
5. Curing — Allow curing time (varies by size, temperature, and humidity—typically 15 minutes to several hours before handling; full cure up to 24 hours before pressure testing). Follow manufacturer or ASTM guidelines.
6. Support — Provide adequate pipe supports to prevent stress on joints.
7. Safety — Work in a ventilated area; avoid threading Sch 40 (it reduces strength).