AGM upvc Plug Tee 3″

Description

upvc plug tee 3″

 

AGM imported from Saudi Arab ASTM uPvc Sch-40 Pressure Fittings, Drain sewer ventilation. importer in Pakistan contact 0322-3540656

 

What is AGM upvc Plug Tee 3″ ?

 

Description

The AGM UPVC Plug Tee 3″ Sch 40 is a specialized 90-degree tee fitting produced by Arabian Gulf Manufacturers Ltd. (AGM), a Saudi Arabian company based in Jeddah/Riyadh. It is made from un plasticized polyvinyl chloride (uPVC), a rigid, durable plastic material resistant to corrosion and chemicals. This fitting is often referred to as a “tee with access cap” or cleanout tee in official catalogs, where one branch includes a removable threaded plug (or access cap) for maintenance access. It is primarily designed for branching pipelines while providing a cleanout point to clear blockages.

It is dual-rated for pressure applications (e.g., cold water supply) and non-pressure drain, waste, and vent (DWV) systems, making it versatile for sewerage, drainage, ventilation, and water distribution.

Specifications

• Brand/Manufacturer: Arabian Gulf Manufacturers Ltd. (AGM), Saudi Arabia
• Size: 3 inches (nominal diameter)
• Schedule: 40 (thicker wall for higher pressure resistance)
• Material: uPVC (Un plasticized Polyvinyl Chloride), compliant with ASTM D1784
• Color: White (common for pressure/DWV; gray variants for some DWV applications)
• Joint Type: Solvent weld sockets on main run and two branches; one branch typically female threaded (FNPT) for removable plug/access cap
• Standards: ASTM D2466 (socket-type fittings), ASTM D2665 (DWV fittings), ASTM D1785/D2672 (related pipe/fitting specs)
• Maximum Operating Temperature: 60°C (140°F)
• Pressure Rating: Suitable for cold water pressure systems (approx. 260 psi at 23°C for 3″ Sch 40 uPVC, with safety factor; derates at higher temperatures)
• Socket Dimensions (approximate for 3″): Entrance ~89.3 mm, bottom ~88.7 mm, minimum socket length ~47.6 mm
• Weight/Other: Lightweight compared to metal; exact weight varies (~0.5-1 kg depending on design)

Installation

1. Preparation: Cut pipes squarely using a pipe cutter. Deburr and chamfer ends. Clean pipe ends and fitting sockets with a clean cloth (avoid contaminants).
2. Solvent Cement Application: Use uPVC-specific solvent cement (primer optional per local codes). Apply evenly to pipe end and socket interior.
3. Assembly: Quickly insert pipe fully into socket (full insertion depth). Twist 1/4 turn if recommended, hold for 30 seconds to set initially. Allow full cure time (varies by temperature/humidity, typically 15-60 minutes for handling, 24 hours for pressure).
4. Plug/Access Cap: Screw the threaded plug/cap tightly into the branch (hand-tight plus wrench if needed; use thread sealant if specified).
5. Guidelines: Follow ASTM D2855 for solvent welding. Install per local plumbing codes. No heat/electricity required—easy in confined spaces. Test system for leaks after curing.

Usage

• Primary Applications:
  • Sewerage and Drainage: Provides branching with a cleanout point for rodding/snaking blockages. Ideal for soil/waste lines, installed at direction changes or required intervals.
  • Water Supply: For cold water distribution branching (pressure-rated); plugged branch can serve as future extension or inspection point.
  • Ventilation (DWV): In vent stacks or drain systems for air flow and maintenance access.
• Advantages: Corrosion-proof, non-toxic, smooth bore reduces friction/slime buildup, flame-resistant, lightweight for easy handling, long service life (50+ years in suitable conditions).
• Limitations: Not for hot water (above 60°C) or compressed air. Avoid direct sunlight exposure long-term (UV degradation).