AGM upvc pipe 3″ SDR-32.5

Description

upvc pipe 3″ SDR-32.5

 

AGM imported from Saudi Arab ASTM uPvc pipes sdr-32.5, Drain sewer ventilation HVAC .importer distributor in Pakistan contact 0322-3540656

 

What is AGM upvc pipe 3″ SDR-32.5 ?

 

A wide range of fluid-conveying systems use an AGM UPVC Pipe 3″ SDR-32.5, a type of Un plasticized Polyvinyl Chloride (UPVC) pipe. When scaled up to an 8″ size, it’s essentially the same type of pipe but with a larger diameter.

Here’s a clear breakdown of what it is, what it’s used for, and why SDR-32.5 matters:

---

 UPVC  AGM upvc pipe 3″ SDR-32.5

• Material: UPVC (Un plasticized PVC) — a rigid, durable, chemical-resistant thermoplastic.

• Brand/Mark: AGM — indicates the manufacturer or product line.

• Size: 8″ nominal diameter (your referenced version; original example was 3″).

• Imported: From Saudi Arabia — often following GCC / ASTM / relevant standards.

---

📏 Understanding SDR-32.5

SDR = Standard Dimension Ratio
It describes the ratio between the pipe’s outer diameter and wall thickness:

SDR=Outside Diameter Wall Thickness\text{SDR} = \frac{\text{Outside Diameter}}{\text{Wall Thickness}}SDR=Wall Thickness Outside Diameter​

• SDR-32.5 means a relatively thicker wall compared to higher SDR values (like SDR-41).

• Lower SDR numbers = thicker wall = higher pressure rating.

• SDR-32.5 is commonly used in underground sewer, drainage, and medium pressure liquid transport.

Unlike Schedule (SCH) ratings, SDR is a dimensional system used widely in PVC/HDPE piping.

---

🛠️ Typical Uses

An 8″ AGM UPVC SDR-32.5 Pipe can be used in:

HVAC Systems

• Drain lines for condensate

• Non-pressurized return lines

• Cooling water distribution where UPVC compatibility is fine

Water Supply

• Cold potable water mains (depending on local standards)

• Intermediate pressure service

• Building infrastructure runs

Sewerage & Wastewater

• Gravity sewer lines

• Storm drains

• High volume wastewater conveyance

UPVC is ideal for these because it’s:

• Corrosion & chemical resistant

• Smooth-bore (low friction)

• Lightweight and easy to install

• Good long-term life for drainage/sewer networks

---

🧠 How It Compares With Other Ratings

Note: An 8″ SDR-32.5 pipe generally has a thicker wall and higher pressure rating than an SDR-41 pipe but lower than an 8″ SCH-40 pipe (if compared directly).

---