AGM Brass thread Female Socket 3/4″

Description

AGM Brass thread Female Socket 3/4″

• Imported from Saudi Arab.
• Schedule 80 high pressure
• plumbing installation material.
• 1/2″ to 2″ sizes.
• AR Corporation contact 0322-3540656

 

What is AGM Brass thread Female Socket 3/4″ ?

 

A heavy-duty female-to-female threaded coupling used to join two 3/4″ male threaded pipes/fittings in plumbing, HVAC, and industrial fluid systems. Made from pressure-rated brass for longevity and leak-free connections.

Key Features AGM Brass thread Female Socket 3/4″

• 3/4″ BSP thread (Pakistan/GCC standard): fits common 3/4″ male BSP (G or R) threads

• High-pressure capable: suitable for water, air, and non-corrosive fluids in building and light industrial services

• Hot-forged brass body: crack-resistant, good machinability, corrosion resistance

• Compact straight-coupling form: easy to install in tight spaces

• Reusable: can be disassembled for maintenance (unlike soldered joints)

Typical Specifications (guide values)

• Nominal size: 3/4″ (DN20)

• Connection ends: Female thread × Female thread

• Thread standard:

  • BSPP (G 3/4) parallel per ISO 228-1 or

  • BSPT (R 3/4) taper per ISO 7-1
    (Match the socket to your male thread type; most pipe threads in PK/GCC are BSP.)

• Thread pitch: 14 TPI (3/4″ BSP)

• Material: Hot-forged brass (Cu-Zn alloy). DZR brass (CW602N) variants may be available for aggressive/potable water.

• Finish: Natural brass (sometimes nickel-plated depending on lot)

• Working pressure: up to 25 bar (PN25) at 20 °C (typical for robust brass sockets)
  (Actual rating depends on the specific AGM batch/datasheet; derate as temperature rises.)

• Working temperature: -20 °C to +110 °C continuous (water/air); short peaks higher if fluid and sealant allow

• Media compatibility: Cold/hot water, compressed air, inert gases, oils, non-corrosive liquids
  (Avoid ammonia-bearing, highly acidic, or dezincifying media unless using DZR brass.)

• Quality checks: Factory leak-tested; threads gauged to ISO standard

• Country of origin: KSA (Kingdom of Saudi Arabia)

Note: If you require potable water compliance or lead-free brass, request the DZR/low-lead variant and the relevant certificate with your order.

Dimensions (typical, for reference)

• Threaded ends: G/R 3/4 (female)

• Body length: ~26–32 mm

• Across flats (if hex form): ~27–30 mm
  (Exact dimensions vary slightly by production; ask for the AGM drawing if you need exact numbers for prefab.)

Description / How it works

The socket provides a straight, rigid connection between two male threaded components. With proper thread sealant on taper threads (or a sealing washer on parallel threads when used with a flat-face fitting), it ensures a durable, pressure-tight joint without welding, soldering, or solvent cement.

Recommended Uses

• Domestic & commercial plumbing (cold/hot water lines)

• HVAC closed-loop heating/chilled-water lines

• Compressed air header and drops

• Irrigation and booster pump manifolds

• Industrial utilities: non-corrosive liquids and oils