AGM Male Adapter 1/2″

Description

 Male Adapter 1/2″ AGM imported from Saudi Arab

ASTM uPvc

Sch-40 Pressure Fittings

Drain sewer ventilation. Importer contact 0322-3540656

 

What is AGM Male Adapter 1/2″ ?

 

AGM UPVC Male Adapter 1/2″ SCH 40 is a transition fitting manufactured by Arabian Gulf Manufacturing (AGM), a Saudi Arabian company known for PVC piping systems. This adapter connects UPVC pipes to threaded (male) components, such as metal pipes or valves, in plumbing systems. It’s designed for both sewerage (drainage/waste) and water supply applications, though its use in potable water depends on the variant (e.g., blue for potable, clear or red for non-potable). Imported from Saudi Arabia, it complies with standards like ASTM D1785 and ISO 4422, offering durability in high-temperature, corrosive environments. The SCH 40 designation indicates standard wall thickness for moderate strength in low-pressure systems.

Description

• Material: Rigid UPVC, providing corrosion resistance, chemical inertness, and ease of handling. It’s non-toxic and suitable for indoor/outdoor use.
• Shape and Size: A male adapter with a 1/2-inch (12.7 mm) nominal threaded end on one side and a socket or plain end for UPVC pipe connection on the other. The “1/2″” refers to the threaded size.
• Color: Typically clear or blue for water supply (potable); red variants may be used for sewerage to indicate non-potable systems. (Confirm color with supplier for specific use.)
• Key Features: Threaded male end (NPT or BSPT standard) for screwing into female fittings; smooth internal surface minimizes flow resistance; resistant to UV, acids, and scaling.

This fitting is part of AGM’s SCH 40 series, emphasizing reliability for gravity or low-pressure applications.

Specification

• Dimensions:
  • Threaded end: 1/2″ NPT (National Pipe Thread) or equivalent (OD ≈ 0.84″ or 21 mm).
  • UPVC socket end: Fits 1/2″ nominal UPVC pipe (actual OD ≈ 0.84″ or 21 mm).
  • Wall thickness: SCH 40 (≈ 0.109″ or 2.8 mm for 1/2″ pipe).
  • Length: Typically 1-2 inches (25-50 mm).
• Pressure Rating: Low-pressure (up to 150-200 psi for water supply; non-pressure for sewerage gravity flow).
• Temperature Range: -10°C to +60°C (14°F to 140°F), suitable for Saudi Arabia’s climate.
• Standards Compliance: ASTM D2665 for UPVC fittings, ISO 4422, and Saudi standards (SASO). Thread standards per ANSI/ASME B1.20.1.
• Packaging: Sold individually or in bulk; weight per fitting ≈ 0.05-0.1 kg.
• Lifespan: 50+ years, with resistance to rust and chemical degradation.

Check AGM’s datasheet for precise measurements, as slight variations may apply.

Installation

UPVC male adapters are installed by solvent cementing the UPVC side and threading the male end. Follow these steps (use safety gear and local codes):

1. Preparation: Cut UPVC pipe to length and deburr. Clean threads and pipe end.
2. Priming: Apply UPVC primer to the pipe end and adapter socket.
3. Cementing: Coat with UPVC solvent cement, insert pipe into adapter, and twist slightly. Hold for 30-60 seconds.
4. Threading: Screw the male threaded end into the female component (e.g., valve or metal pipe), using Teflon tape on threads for sealing. Tighten with a wrench to avoid over-tightening.
5. Alignment: Ensure proper orientation for flow; for sewerage, maintain slope.
6. Curing: Allow 24 hours for cement to cure before use or testing.
7. Tools Needed: Pipe cutter, deburring tool, primer, cement, wrench, Teflon tape, and gloves.
8. Tips: Install above 10°C (50°F). For water supply, pressure-test the system. Avoid bending threads.

Improper threading can cause leaks; consult a plumber for integrated systems.

Usage

• Primary Applications: Transitions in water supply lines (potable or non-potable) to connect UPVC pipes to threaded metal fittings, pumps, or faucets. In sewerage, it links drainage pipes to threaded waste outlets or vents. Common in residential, commercial, and industrial plumbing.
• Advantages: Facilitates easy mixing of materials; lightweight and corrosion-resistant, ideal for Saudi Arabia’s hot, sandy conditions. Cost-effective and long-lasting.
• Limitations: Not for high-pressure systems; ensure color-coded use (blue for potable water). Threads may loosen over time if not sealed properly.
• Maintenance: Minimal; inspect threads for wear and re-tape if needed. Clean with water.