AGM upvc Tee 1-1/2″

Description

upvc Tee 1-1/2″

 

AGM imported from Saudi Arab ASTM uPvc Sch-40 Pressure Fittings, Drain sewer ventilation. imported material distributor in Islamabad 0322-3540656

 

What is AGM upvc Tee 1-1/2″ ?

 

The AGM uPVC Tee (1-1/2″ Schedule 40) is a precision-engineered fitting manufactured by Arabian Gulf Manufacturers Ltd.¹ (AGM) in Saudi Arabia.² This specific size is a “workhorse” in the industry, commonly used for high-velocity HVAC condensate lines, residential water supply, and compact drainage systems.

---

1. Description & “HVAC” Context

While a Tee is a standard branching fitting, the 1-1/2″ (38mm) size is frequently labeled for HVAC applications because it is the standard diameter for condensate drain lines in large commercial AC units and chillers.

• Material: Un plasticized Polyvinyl Chloride (uPVC), which is more rigid and chemical-resistant than standard PVC.

• Source: Imported from Riyadh, Saudi Arabia, utilizing high-quality SABIC resin.

• Color: White (standard for Sch 40).

---

2. Technical Specifications

AGM fittings are dual-certified, meaning they meet standards for both pressure (water supply) and non-pressure (sewerage/vent) applications.

Feature	Specification
Nominal Size	1-1/2 inch (Outer Diameter approx. 48.26 mm)
Wall Thickness	Schedule 40 (Approx. 3.68 mm)
Pressure Standards	ASTM D2466 (Poly Vinyl Chloride Plastic Pipe Fittings)
Drainage Standards	ASTM D2665 (Standard for Drain, Waste, and Vent)
Pressure Rating	Max approx. 330 PSI (at 23°C)
Temperature Range	Up to 60°C (140°F)
Connection Type	Solvent Weld (Socket)

---

3. Usage & Applications

• HVAC Systems: Primary and secondary condensate drain lines for Air Handling Units (AHUs) and Fan Coil Units (FCUs).

• Potable Water: Distribution of cold water in residential and commercial plumbing.

• Sewerage & Venting: Small-scale waste lines (sinks, basins) and air vent stacks (DWV).

• Irrigation: Lateral lines for landscaping and agricultural drip systems.

---

4. Installation Guide

Installation relies on Solvent Welding, which creates a permanent chemical bond.

1. Preparation: Cut the 1-1/2″ pipe squarely. Use a knife or deburring tool to remove the internal and external burrs.

2. Dry Fit: Insert the pipe into the AGM Tee to ensure it reaches at least 1/3 to 2/3 of the socket depth before it gets tight.

3. Cleaning/Priming: Wipe both the pipe end and the Tee socket with a clean rag. Apply a uPVC primer to soften the plastic surfaces.

4. Cementing: Apply a layer of uPVC Solvent Cement to the outside of the pipe and a thin layer inside the Tee.

5. Assembly: Push the pipe into the Tee with a 1/4 turn to distribute the cement.¹¹ Hold firmly for 30 seconds.

6. Curing: Let it set for 15 minutes before handling; wait 24 hours before performing a full-pressure test.

---

5. Why Choose AGM (Saudi Import)?

• Lead-Free: AGM uses a lead-free formula, making it safe for drinking water.

• UV Resistance: High-quality stabilizers help the fitting resist brittleness if exposed to sunlight during construction.

• Consistency: Unlike local “generic” fittings, AGM’s injection molding ensures the socket diameter is perfectly consistent, reducing the risk of “loose” joints that leak under pressure.