Tee Female 32×3/4″ Brass RAKtherm PPRc

Description

Tee Female 32×3/4″ Brass

 

RAKtherm imported PPRc, Food graded third generation Poly propylene Random with Co-polymer
materials. contact 0322-3540656

 

 

What is Tee Female 32×3/4″ Brass RAKtherm PPRc ?

 

The Tee Female 32×3/4″ Brass RAKtherm PPRc PN 25 acts as a PP-RC transition tee that branches a 32 mm PPR water line while providing a 3/4″ female brass threaded outlet for connecting valves, fixtures, meters, or equipment. Typically used in hot and cold water supply and HVAC piping, it combines socket-fusion on the plastic side with a robust metal thread on the branch side for enhanced durability.

Description Tee Female 32×3/4″ Brass RAKtherm PPRc

This fitting is part of the RAKtherm PP-R piping range imported from the UAE, which is designed for pressurized water systems and building services applications. The female brass insert gives a strong threaded connection, while the PPRc body provides corrosion resistance, long service life, and hygienic water contact suitability. In practical terms, it lets you take one 32 mm main line and create a side take-off with a 3/4″ female threaded connection.

Main specifications

The available product data for similar RAKtherm female fittings shows PN 25, brass threaded inserts, and use in hot/cold water HVAC systems, so the same family characteristics apply to this fitting. PN 25 means it is intended for higher-pressure service than PN 20 or PN 16 fittings.

Installation

1. Cut the 32 mm pipe square and deburr it.

2. Mark the insertion depth on the pipe.

3. Heat both the pipe and the 32 mm socket of the tee with a PP-R fusion welding tool.

4. Insert fully without twisting and hold steady until the joint sets.

5. Seal the 3/4″ female brass thread with PTFE tape or suitable thread sealant.

6. Screw in the male threaded fitting, valve, or accessory carefully, without over-tightening.

7. Pressure test the line after installation.

Usage

This fitting is commonly used in potable water distribution, risers, branch lines, pump rooms, boiler connections, manifold tie-ins, and HVAC water circuits. It is useful when the main line is PP-RC but the branch needs to connect to a threaded metal component such as a valve, filter, pressure gauge, faucet adapter, or small equipment connection. It is also suitable for hot and cold water systems where corrosion resistance and clean water contact are important.

Practical notes

• Use it only with compatible PP-RC pipe and proper fusion equipment

• Make sure the pressure class of the whole system matches PN 25 service conditions.

• Support nearby pipe runs properly to avoid stress on the threaded outlet.

• Use a male-threaded brass or metal component on the 3/4″ female side.

• For hot water or HVAC lines, allow for thermal expansion and proper pipe clips.