Saudi Arab upvc pipe 10″ SDR41

Description

Euro Gulf upvc pipe 10″ SDR41

upvc pipe for drain sewer

 

Euro Gulf local Manufacturer Distributor Suppliers in Karachi Contact 0321-2248975 ASTM uPvc pipes sdr-41, Drain sewer ventilation

 

Saudi Arab upvc pipe 10″ SDR41 ?

 

Euro Gulf (or Saudi Arab/Euro Gulf-branded) 10″ SDR41 UPVC pipe is a non-pressure or low-pressure un plasticized polyvinyl chloride (uPVC/PVC) pipe commonly sold in markets like Pakistan (e.g., via suppliers in Karachi) and associated with Saudi Arabian or Gulf manufacturing standards. It is primarily marketed for drain, sewer, and ventilation applications.

Key Description and Features

• Material: Rigid uPVC (unplasticized PVC) — lightweight, durable, corrosion-resistant, chemical-resistant, and immune to rust or scaling. It offers a smooth internal bore for excellent flow characteristics and low friction.
• Color: Typically grey (common for drainage/sewer pipes in the region); some variants may be white or other colors.
• Type: SDR 41 series pipe, often referenced under ASTM standards for uPVC pipes. It is a gravity-flow/non-pressure or very low-pressure pipe (not intended for high-pressure water supply).
• Jointing: Usually solvent cement (glue) joints or plain ends; larger sizes may support rubber ring/gasket joints in some systems. Belled (socketed) ends are common for easy installation.
• Length: Standard lengths are often 6 meters (≈20 ft) per piece, though this can vary by supplier.
• Advantages: Easy to transport and install due to light weight; long service life with minimal maintenance; resistant to biological growth and many chemicals; cost-effective for large-diameter drainage.

Note: “Euro Gulf” refers to a brand (Euro Gulf Industries, a Pakistani manufacturer of uPVC and other pipes, or imported Gulf/Saudi-branded equivalents). “Saudi Arab” variants are often listed similarly and supplied locally in places like Karachi. These are not high-pressure potable water pipes but suit non-pressure uses.

Specifications (Typical for 10″ / ≈250 mm Nominal Size)

• Nominal Diameter: 10 inches (≈250 mm outside diameter series).
• SDR (Standard Dimension Ratio): 41 → This is the ratio of outside diameter to minimum wall thickness (OD / t ≈ 41). It indicates a relatively thin wall suitable for low-pressure or gravity applications.
• Wall Thickness: Approximately 6.0–6.2 mm minimum (based on comparable metric SDR41 pipes around 250 mm; exact value follows the specific standard). For reference, similar regional pipes list ~5.0–7.1 mm min/max range in SDR41 series.
• Outside Diameter (OD): ≈250–250.8 mm (metric equivalent) or 10.75–10.80 inches in IPS (Iron Pipe Size) series, depending on whether it’s metric or ASTM/IPS-based.
• Pressure Rating: Low — typically rated for gravity flow (sewer/drain) or very low pressure (e.g., ~PN6 / 6 bar / ~87 psi in some SDR41 pressure-rated contexts, but de-rated for drainage use). Not for high-pressure applications. Temperature range usually up to ~60°C (140°F).
• Standards Referenced:
  • ASTM (e.g., related to D1785, D2241, or D3034 for sewer/drainage).
  • Regional equivalents: SASO/ISO 1452 (PN6 SDR41 for some pressure variants), BS 3505 Class B, or BS EN 1401 for drainage/sewer.
  • Often listed as “ASTM uPVC pipes SDR-41” in sales listings.

Exact dimensions (wall thickness, weight, OD tolerance) follow the manufacturer’s adherence to the cited standard. Weights for 6m lengths of similar 8–12″ SDR41 pipes are in the range of several kg per meter, making them manageable.

For precise technical data sheet values (e.g., exact min/max wall, ovality, or ring stiffness for sewer use), check the supplier’s catalogue or request from Euro Gulf Industries / Saudi manufacturers, as slight variations exist between pressure (ISO/SASO) and drainage (EN/ASTM) series.

Usage

• Primary Applications:
  • Drainage and sewer systems — underground or above-ground gravity flow for wastewater, stormwater, or sanitary sewers.
  • Ventilation — soil/vent stacks, rainwater downpipes, or exhaust vents in plumbing systems (DWV — Drain, Waste, Vent).
  • Other common uses: Non-pressure irrigation, industrial waste lines (where chemical resistance is needed), or cable ducts in some cases.
• Not Recommended For: High-pressure water supply, compressed air, or hot water lines without verification. Operating temperature should stay below 60°C to avoid softening.
• Installation Notes: Use solvent cement for joints (follow manufacturer instructions for cleaning, priming, and curing). Ensure proper bedding/support for underground installs to prevent deformation under soil load. Chamfer pipe ends and follow local plumbing codes.