male-socket-adaptor-raktherm-pprc-20mmx1/2"-25mmx1/2"-25mmx3/4"-32mmx3/4"-32mmx1"-40mmx1"-40mmx1-1/4"-50mmx1-1/2"-63mmx2"-75mmx2-1/2"-90mmx3"-110mmx4"

Male Socket 63×2″ RAKtherm PPRc

RAKtherm ppr pipe and fittings imported from uae, importer, distributors and dealers in karachi pakistan

SKU: ppr-Male-Socket-63x2" Category: Tags: , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,

Description

PPRC Male Socket 63×2″ 

 

Brass male Adaptor (threaded)PPRC RAKtherm Food graded third generation . Distributor supplier  contact 0322-3540656

 

What is Male Socket 63×2″ RAKtherm PPRc ?

 

The RAKtherm Male Socket Brass Adaptor (63mm x 2″) is a critical transition fitting used to bridge high-capacity PPRc piping with metallic valves, pumps, or machinery. Imported from the UAE, these PN 25 fittings are designed for the most demanding mechanical environments, where a standard plastic thread would fail under torque or thermal expansion.

Description & Engineering

This adaptor features a high-grade DZR (Dezincification Resistant) Brass insert molded directly into the PPRc Type 3 body.

  • Integrated Multi-Groove Insert: The brass component is engineered with deep circular grooves to prevent “spinning” or “seepage” between the metal and plastic interface—a common failure point in lower-quality transition fittings.

  • Hexagonal Base: The brass neck usually features a hexagonal shape, allowing installers to use a wrench to steady the fitting while tightening the threaded connection, preventing stress on the fresh fusion weld.

Technical Specifications Male Socket 63×2″ RAKtherm PPRc

Feature Specification
Material PPRc Type 3 + Nickel-Plated Brass
Socket Diameter 63mm (Fusion End)
Thread Size 2″ Male BSPT / NPT
Pressure Class PN 25 (Highest durability)
Thermal Expansion 0.15 mm/mK (Body)
Standards DIN 16962, ISO 15874

Installation & Transition Management

Because 63mm is a large diameter, thermal mass and alignment are critical.

1.Preparation:Marking & Cleaning.

Cut the 63mm pipe square. Mark a fusion depth of 24mm on the pipe. Clean both the 63mm socket and the brass threads.

2.Fusion Welding: Heating Time: 24 Seconds.

Heat the 63mm socket and pipe on the 260°C mandrel. Because of the size, ensure the heating is uniform. Do not exceed 30 seconds to avoid material collapse.

3.Joining & Cooling: Off-Axis Prevention.

Push the pipe into the adaptor socket until the mark is reached. Hold for 10 seconds to set. Wait at least 15-20 minutes before attempting to thread the metal side to avoid damaging the cooling fusion bond.

4.Threaded Connection: Teflon/Sealant.

Apply high-quality PTFE tape or pipe dope to the 2″ brass threads. Use a pipe wrench on the hexagonal part of the fitting—never use the pipe itself for leverage.

 

Primary Usage Scenarios

For a professional operation like AR Corporation, this 63mm adaptor is typically the “entry point” for main utility lines:

  • Pump Room Manifolds: Connecting the main 63mm PPRc supply line to 2″ heavy-duty brass valves or circulation pumps.

  • Commercial HVAC: Transitioning from the main chiller water supply riser to the secondary distribution valves.

  • Main Water Header: Splitting high-pressure water from a ground tank or booster set into the building’s main distribution vertical.

Reviews

There are no reviews yet.

Be the first to review “Male Socket 63×2″ RAKtherm PPRc”

Related products