Hydroplast PVC Jointing Cements Solvent 479 ml (16oz)

Description

Hydroplast PVC Jointing Cements Solvent 479 ml (16oz)

 

Hydroplast  Importer Distributor Dealer online shop suppliers in Pakistan, Karachi, Islamabad. Contact 0322-3540656,

 

What is Hydroplast PVC Jointing Cements Solvent 479 ml (16oz) ?

 

Hydroplast formulated a specialized adhesive, PVC Jointing Cements Solvent (479 ml / 16 oz), for joining PVC (Polyvinyl Chloride) pipes and fittings. It is a solvent-based cement that chemically fuses the surfaces of PVC components, creating a strong, watertight, and permanent bond. This product is typically supplied in a can with an integrated brush for easy application.

Key Features

• Size: 479 ml (16 oz) can

• Type: Solvent cement (sometimes referred to as PVC Solution)

• Color: Available in clear or gray variants.

• Consistency: Thick, creamy, and easy to apply.

• Drying/Curing: Fast-setting; initial set in 15 minutes, full cure in 2 hours.

• VOC: Low VOC emission (environmentally safer option)

• Strength: Heavy-bodied, high-strength adhesive suitable for all classes and schedules of PVC pipe5

• Application Method: Brush attached to the lid for direct application.

Technical Properties

• Forms a strong, durable, and waterproof bond

• Resistant to chemicals and corrosion.

• Suitable for use in both residential and industrial plumbing systems

Usage and Application

Primary Uses

• Joining PVC Pipes and Fittings: Used to connect two pieces of PVC pipe or a pipe and a fitting, ensuring a leak-proof seal in plumbing, irrigation, water supply, drainage, and industrial systems.

• Repairing Cracks: You can use it to seal and repair cracks in existing PVC pipes.

Application Instructions

1. Preparation:

   • Cut the pipe to the required length and ensure a snug fit.

   • Use a dry cloth to clean the surfaces to be joined; you may use a PVC cleaner for best results.

   • If recommended, apply a PVC primer to the surfaces for optimal adhesion.

2. Applying the Cement:

   • Stir the cement if needed; do not use if it has become stringy.

   • Using the brush, apply an even coat of cement to both the outside of the pipe and the inside of the fitting. Avoid excess application to prevent puddling or gaps.

3. Assembly:

   • Quickly join the pipe and fitting while you keep the cement wet, rotating the pipe a quarter turn to ensure even distribution.

   • Hold the joint together for at least 30 seconds to allow the cement to set.

4. Curing:

   • Allow at least 15 minutes before handling the joint.

   • Wait a minimum of 2 hours for the joint to fully cure before subjecting it to water pressure.

5. Testing:

   • After curing, the joint can be tested at pressures up to 180 psi.

Additional Notes

• Compatibility: Designed specifically for PVC plastics; not suitable for all types of plastics.

• Versatility: Can be used on wet pipes, provided the surface is clean.

• Shelf Life: Use within three years of the manufacturing date