Elbow male 32×1″ Brass RAKtherm PPRc

Description

Elbow male 32×1″ Brass

 

RAKtherm imported PPRc, Food graded third generation Poly propylene Random with Co-polymer
materials. contact 0322-3540656

 

What is Elbow male 32×1″ Brass RAKtherm PPRc ?

 

The Elbow male 32×1″ Brass RAKtherm PPRc PN 25 is a 90° transition fitting used to connect a 32 mm PP-RC pipe to a 1-inch male threaded brass connection for hot/cold water and HVAC piping systems.

Description Elbow male 32×1″ Brass RAKtherm PPRc

RAKtherm is a UAE-made PP-R piping system from Ras Al Khaimah, and its product line is designed for pressurized hot and cold water delivery, underfloor heating, chilled water, heating networks, and related building services. The catalogue lists a wide range of fittings including transition elbows and male threaded adapters, and the brand positions its systems for residential, commercial, and industrial water networks. For your item, the brass threaded insert gives a durable metal connection while the PPR body provides corrosion resistance and fusion-welded leak control.

Main specifications

Where it is used

This fitting commonly serves hot and cold potable water distribution within buildings like houses, apartments, hotels, hospitals, and commercial spaces. In HVAC systems, it connects chilled water lines, heating loops, boiler connections, and piping for fan coil units (FCUs) and air handling units (AHUs). Additionally, it links pumps, valves, and manifold tie-ins where a 90° change of direction and a threaded transition are necessary. It’s particularly useful in mechanical rooms for connecting plastic pipes to metal-threaded equipment.

Installation steps

1. Cut the 32 mm pipe square and remove burrs.

2. Clean the pipe and fitting socket.

3. Heat the pipe and elbow socket with a PP-R fusion welding machine, typically around 260 °C.

4. Insert the pipe fully into the socket without twisting, then hold until cooled.

5. Wrap PTFE tape on the 1″ male thread if the mating part is threaded metal.

6. Tighten into the female-threaded valve, pump, fitting, or equipment connection.

7. Pressure test the line before commissioning.

For hot water lines, RAKtherm recommends Stabi/composite pipe where possible because reduced linear expansion improves stability in exposed hot-water runs. Threaded joints should not be overtightened, because the plastic side must not be stressed mechanically.

Usage notes

• Best for transitions between PPR pipe and metal-threaded equipment.

• Suitable for potable water, chilled water, heating water, and general HVAC service.

• Use with correct PN-rated pipe and fittings; PN 25 is the safer choice for higher pressure duty.

• For exposed hot-water or long straight runs, use support clips and allow for thermal expansion.

• Avoid use outside the pressure, temperature, and chemical limits stated by the manufacturer.

Practical meaning

In simple terms, this is a 90-degree adapter elbow that lets you turn a 32 mm RAKtherm PPRc line and finish it with a 1-inch brass male thread for connection to valves or equipment. It is a common plumbing/HVAC detail piece, not a pipe itself, and its main value is creating a reliable plastic-to-metal transition in a pressurized system.