AGM upvc Wye 2″

Description

upvc wye 2″

 

AGM imported from Saudi Arab ASTM uPvc Sch-40 Pressure Fittings, Drain sewer ventilation. Pakistan contact 0322-3540656

 

What is AGM upvc Wye 2″ ?

 

Description

An AGM UPVC Wye is a Y-shaped pipe fitting made from un plasticized polyvinyl chloride (UPVC), a rigid thermoplastic material known for its durability, corrosion resistance, and lightweight properties. The “Wye” design allows for a 45-degree branch connection from a main pipeline, commonly used in plumbing systems to divert flow without sharp angles that could cause clogs or pressure drops. This specific model is a 2-inch (nominal diameter) Schedule 40 variant, meaning it has a thicker wall for higher pressure tolerance compared to Schedule 20. It’s marketed for both sewerage (wastewater drainage) and water supply applications, and as per the query, it’s imported from Saudi Arabia—likely manufactured by AGM Industries or a similar Saudi-based producer specializing in PVC fittings for Middle Eastern markets. UPVC is non-toxic, recyclable, and resistant to chemicals, making it ideal for potable water and sewage systems.

Specifications

Based on standard industry specs for UPVC Schedule 40 fittings (aligned with ASTM D1785 and ISO 4422 standards, which AGM products typically comply with), here are key details for a 2″ Wye:

• Material: Un plasticized PVC (UPVC), free from plasticizers for rigidity and strength.
• Size: 2″ nominal diameter (actual internal diameter ~2.067 inches / 52.5 mm).
• Schedule: 40 (wall thickness ~0.154 inches / 3.91 mm, providing a pressure rating of up to 200-300 PSI at 73°F / 23°C, depending on manufacturer specifics).
• Dimensions:
  • Main run length: Typically 4-6 inches (varies by brand).
  • Branch angle: 45 degrees.
  • End connections: Socket (spigot) for solvent welding or threaded options.
• Pressure Rating: Suitable for low-to-medium pressure systems (e.g., 150 PSI max for water supply at ambient temperatures).
• Temperature Range: -5°C to 60°C (23°F to 140°F); not for hot water above 60°C.
• Standards Compliance: Often meets Saudi Arabian Standards Organization (SASO) certifications, ASTM, and ISO for quality assurance in water and sewer applications.
• Weight: Lightweight, approx. 0.5-1 lb per fitting.
• Color: Usually white or gray for easy identification in plumbing.

For exact AGM-specific specs, consult the manufacturer’s datasheet, as variations may exist (e.g., imported batches might include Arabic labeling or regional adaptations).

Installation

UPVC Wye fittings are installed using solvent cement welding (glue) for permanent, leak-proof joints. Here’s a step-by-step guide:

1. Preparation: Cut the pipe to length using a PVC pipe cutter. Ensure clean, square cuts. Deburr and chamfer edges for smooth insertion.
2. Priming: Apply PVC primer to the pipe end and fitting socket to soften the surface and remove contaminants.
3. Cementing: Apply UPVC solvent cement evenly to both surfaces. Insert the pipe into the Wye socket fully (to the stop) and twist 1/4 turn for even distribution. Hold for 30-60 seconds to set.
4. Curing: Allow 24 hours for full cure before pressurizing. Avoid stressing joints during this time.
5. Tools Needed: PVC cutter, deburring tool, primer, cement, gloves, and safety glasses.
6. Tips: Work in well-ventilated areas (cement fumes are toxic). For threaded versions (if available), use Teflon tape and tighten with wrenches. Ensure alignment to prevent flow restrictions. In Saudi Arabia’s climate, account for thermal expansion by allowing slight movement.

Always follow local plumbing codes (e.g., Saudi Building Code or equivalent) and manufacturer instructions to avoid leaks or failures.

Usage

• Sewerage: Primarily for drainage systems, where the Wye diverts wastewater from toilets, sinks, or showers into main sewer lines. Its 45-degree angle reduces clogging risks compared to 90-degree elbows, making it ideal for gravity-fed sewer systems in residential or commercial buildings.
• Water Supply: Used in cold water distribution lines for branching (e.g., connecting fixtures like faucets or sprinklers). It’s not recommended for hot water or high-pressure systems without reinforcement.
• Applications: Common in homes, offices, irrigation, and industrial setups. Suitable for buried or exposed installations, but protect from UV exposure outdoors (use sleeves if needed).
• Advantages: Corrosion-resistant, easy to install, cost-effective, and long-lasting (lifespan 50+ years). Not for compressed air or flammable fluids.
• Limitations: Brittle in freezing temperatures; avoid impacts. For high-heat or chemical-heavy uses, opt for CPVC instead.