AGM upvc P-Trap 2″

Description

upvc p-trap 2″

 

AGM imported from Saudi Arab ASTM uPvc Sch-40 Pressure Fittings, Drain sewer ventilation. imported fittings contact 0322-3540656

 

AGM upvc P-Trap 2″ ?

 

📘 Product Description

• Type: P-Trap fitting – shaped like the letter “P,” designed to trap water and block sewer gases.
• Material: UPVC (Un plasticized Polyvinyl Chloride) – strong, lightweight, corrosion-resistant.
• Size: 2 inches nominal bore.
• Standard: SCH 40 (Schedule 40) – medium pressure rating, suitable for drainage and water supply.
• Origin: Imported from Saudi Arabia.
• Function: Provides a water seal in drainage systems to prevent foul odors from escaping into living spaces.

⚙️ Specifications

🛠️ Installation Guide

1. Pipe Preparation
   • Cut the pipe squarely and clean the edges.
   • Ensure the pipe end is free of burrs and dust.
2. Dry Fit
   • Insert the P-Trap into the pipe to check alignment.
3. Apply Solvent Cement
   • Use UPVC-compatible solvent cement.
   • Apply evenly on both pipe end and inside the P-Trap socket.
4. Assembly
   • Push the pipe into the P-Trap until fully seated.
   • Hold for a few seconds to ensure bonding.
5. Curing
   • Allow at least 24 hours for full curing before testing with water flow.

💡 Usage

• Sewerage Systems: Creates a water seal to block sewer gases.
• Drainage Lines: Commonly used under sinks, wash basins, and floor drains.
• Water Supply Systems: Helps in maintaining hygienic flow by preventing backflow of gases.
• Industrial Applications: Suitable for chemical-resistant drainage systems.

⚠️ Key Considerations

• Water Seal Depth: Ensure proper installation to maintain effective water seal.
• Pressure Limitations: SCH 40 is not suitable for very high-pressure lines.
• Temperature Sensitivity: Avoid hot water above 60°C.
• UV Exposure: Prolonged sunlight may degrade UPVC; consider protective coatings outdoors.