AGM cpvc Tee 1″

Description

 Cpvc Tee 1″ AGM

 

AGM Cpvc for hot water, imported from Saudi Arab. Schedule 80 materials for high pressure and hot water till 93 degree supplier contact 0322-3540656

 

What is AGM cpvc Tee 1″ ?

 

The AGM CPVC Tee 1″ is a specific plumbing fitting manufactured by Arabian Gulf Manufacturers Ltd. (AGM), a company based in Saudi Arabia. It is designed for use in hot and cold water distribution systems.

⚙️ Product Details & Specifications

Feature	Description
Manufacturer	Arabian Gulf Manufacturers Ltd. (AGM)
Country of Origin	Saudi Arabia
Material	C-PVC (Chlorinated Polyvinyl Chloride)
Fitting Type	Tee (Equal) – Connects three pipes of the same diameter. Typically a 90-degree branch.
Nominal Size	1 inch (1″) for all three ports.
Application	Hot and Cold Water Distribution in residential, commercial, and industrial buildings.
Joint Type	Solvent Weld (Socket) – Joined using CPVC solvent cement.
Color	Typically Gray or Light Gray.
Standard	Likely conforms to ASTM F437/F439 (Schedule 80) or ASTM D2846, and potentially SASO (Saudi Standards, Metrology, and Quality Organization).
Schedule	Often available in Schedule 80 for pressure applications, providing greater wall thickness and pressure resistance.
Max Operating Temp.	CPVC is rated to withstand temperatures up to 93°C (199°F).
Pressure Rating	Pressure rating (e.g., 80 PSI or equivalent BAR/kgf/cm$^2$) will vary based on the specific Schedule (40 or 80) and the operating temperature. The pressure rating decreases as the water temperature increases.
Chemical Resistance	Excellent resistance to many chemicals, alkalis, acids, and unaffected by chlorine and chlorine dioxide (common water disinfectants).

---

📝 Description and Usage

Description

The AGM CPVC Tee 1″ is a three-way pipe fitting shaped like the letter “T”. All three ends are socket-type (plain ends) designed to receive the spigot end of a 1-inch CPVC pipe. It is an equal tee, meaning the branch is the same diameter as the main run.

AGM materials are often sourced from high-quality CPVC compounds (like Durastream) and are manufactured in Saudi Arabia to international standards.

Usage

The primary use of the 1″ CPVC Tee is to divide or distribute the flow of water from a main 1″ pipe into a side branch of 1″ pipe.

• Hot Water Systems: Essential for plumbing hot water lines from a water heater to various fixtures or distribution points.

• Cold Water Systems: Also used for potable (drinking) cold water lines.

• Industrial Applications: Suitable for transporting various hot liquids and chemicals where corrosion resistance is critical.

---

🛠️ Installation

1. Preparation: Cut the CPVC pipe squarely and remove burrs. Lightly bevel the pipe end.

2. Dry Fit: Ensure the pipe fits into the socket of the tee, but only about one-third to two-thirds of the way without force.

3. Primer Application (Recommended): Apply a CPVC primer to the pipe end and the inside of the fitting socket to soften the plastic surfaces and prepare them for bonding.

4. Cement Application: Apply a thin, uniform coat of CPVC solvent cement (specific for CPVC) to the pipe end and a slightly heavier coat to the inside of the fitting socket.

5. Assembly: Quickly insert the pipe fully into the fitting socket with a quarter-turn twist to ensure even distribution of the cement.

6. Curing: Hold the joint firmly for about 10-30 seconds to allow the initial set. Wipe off excess cement.