Description
AGM cpvc Socket 1-1/2″
Schedule 80 materials for high pressure and hot water (till 93 degree Celsius) plumbing installation material. Available from 1/2″ to 2″ sizes. Malik Corporation is the sole importer of AGM in Pakistan
What is AGM cpvc Socket 1-1/2″ ?
Specifications
The following table outlines the key specifications for the AGM CPVC Socket 1-1/2″:
| Parameter | Details |
|---|---|
| Size | 1-1/2″ (Nominal Pipe Size) |
| Material | CPVC (Chlorinated Polyvinyl Chloride) |
| End Type | Socket x Socket (Slip x Slip) |
| Schedule Rating | Schedule 80 (Sch 80) for high-pressure applications |
| Standards | ASTM F439 (Fittings), ASTM D2846 (Pipes compatibility), SASO equivalent to DIN |
| Color | Grey (Light Grey) |
| Maximum Operating Temperature | 93°C (200°F) |
| Pressure Rating | Up to 100 psi at 23°C (73°F); derates with temperature increase (e.g., 40 psi at 82°C) |
| Dimensions (Approx.) | Outer Diameter: 48.3 mm; Wall Thickness: 3.8 mm (compatible with Sch 80 pipe) |
| Weight (Approx.) | 0.15–0.20 kg per piece |
| Manufacturing Origin | Jeddah, KSA (Imported) |
| Availability | Part of full range from 1/2″ to 8″; sold in packs or individually |
These specs ensure compatibility with AGM CPVC pipes and other ASTM-compliant systems. Always verify with the supplier for exact dimensions based on batch variations.
Installation
Installation of the AGM CPVC Socket 1-1/2″ follows standard solvent weld procedures for CPVC systems. Use AGM-recommended CPVC solvent cement (e.g., AGM Solvent 914) and primer for optimal bonding. Here’s a step-by-step guide:
- Preparation: Cut pipes squarely using a CPVC-specific saw or cutter. Deburr and bevel the edges (1/16″ chamfer) to prevent debris from entering the joint. Dry-fit components to ensure proper alignment and socket depth (typically 3/4″ insertion for 1-1/2″ size).
- Cleaning: Wipe pipe ends and socket interior with a clean, dry cloth to remove dirt, grease, or moisture. Apply CPVC primer to both the pipe exterior and socket interior using a dauber; let it soften the surfaces for 10–15 seconds.
- Application: Generously apply CPVC solvent cement to the primed pipe end and a thin layer inside the socket. Quickly insert the pipe into the socket with a 1/4-turn twist for even distribution. Hold in place for 30 seconds to set the initial bond. Ensure the joint is fully seated without gaps.
- Curing: Allow 15–30 minutes cure time before handling (longer in humid/cold conditions). Full pressure testing can occur after 24 hours. Support pipes per local codes (e.g., every 4–6 ft horizontally).
- Safety Notes: Wear gloves, eye protection, and work in a ventilated area—solvent fumes are hazardous. Avoid over-application of cement to prevent drips or weak joints. Do not use petroleum-based lubricants.
Professional plumbers should perform installation to comply with building codes (e.g., IPC or local equivalents). AGM fittings are not compatible with PVC or metal pipes without adapters.
Usage
The AGM CPVC Socket 1-1/2″ is primarily used in:
- Hot and Cold Water Distribution: For potable water supply lines in homes, apartments, and offices, handling temperatures up to 93°C without degradation.
- HVACR Systems: In heating, ventilation, air conditioning, and refrigeration for non-pressurized drain lines or low-pressure refrigerant lines.
- Drainage and Ventilation: Suitable for DWV (Drain, Waste, Vent) applications where corrosion resistance is needed.
- Industrial Applications: Chemical transport or process piping in factories, thanks to CPVC’s resistance to acids, salts, and chlorides.
Reviews
There are no reviews yet.