AGM cpvc pipe 1/2″ sch80

Description

Cpvc pipe 1/2″ sch80

 

Cpvc for hot water, AGM imported from Saudi Arab. Schedule 80 materials for high pressure and hot water till 93 degree contact 0322-3540656

 

What is AGM cpvc pipe 1/2″ sch80 ?

 

Description

AGM CPVC (Chlorinated Polyvinyl Chloride) pipe is a rigid, thermoplastic piping system designed for residential, commercial, and industrial plumbing applications. The 1/2″ (nominal diameter) Schedule 80 (SCH80) variant features a thicker wall for enhanced durability and pressure resistance, making it suitable for both hot and cold water distribution. Imported from Saudi Arabia, this product is manufactured by Arabian Gulf Manufacturing (AGM), a leading producer in the region, ensuring compliance with international standards like ASTM and ISO. It is non-toxic, corrosion-resistant, and ideal for potable water systems, offering a cost-effective alternative to metal pipes with easier installation.

Specifications

• Material: Chlorinated Polyvinyl Chloride (CPVC), formulated for high-temperature resistance.
• Size: 1/2″ nominal diameter (actual OD: 0.840 inches; ID: 0.546 inches for SCH80).
• Schedule: SCH80 (wall thickness: 0.147 inches), rated for higher pressure than SCH40.
• Pressure Rating: Up to 400 psi at 73°F (23°C) for cold water; up to 100 psi at 180°F (82°C) for hot water (per ASTM D2846).
• Temperature Range: -20°F to 200°F (-29°C to 93°C), suitable for hot water up to 180°F.
• Length: Typically sold in 10-foot or 20-foot straight lengths; fittings available separately.
• Color: Usually white or gray for easy identification.
• Standards Compliance: Meets ASTM F441/F439, NSF/ANSI 61 (potable water), and ISO 15877. Imported from Saudi Arabia, it may also adhere to local standards like SASO.
• Chemical Resistance: Resistant to most acids, alkalis, and salts; not recommended for strong oxidizing agents or solvents.
• Thermal Expansion: Coefficient of 3.0 x 10^-5 in/in/°F, requiring expansion loops in long runs.

Installation

CPVC pipes like AGM SCH80 are installed using solvent cement welding (glue) for permanent joints, ensuring leak-proof connections. Follow these steps for safe installation:

1. Preparation: Cut pipe square using a fine-toothed saw or pipe cutter. Deburr edges and clean with primer for better adhesion.
2. Fitting Selection: Use CPVC fittings (elbows, tees, couplings) rated for SCH80. Ensure compatibility with pipe size.
3. Joining: Apply CPVC primer to both pipe and fitting ends, then solvent cement. Insert pipe fully into fitting and hold for 30-60 seconds while rotating slightly. Allow 24 hours cure time before pressurizing.
4. Support: Install hangers every 3-4 feet for horizontal runs and at fittings for vertical. Use CPVC-specific clamps to avoid damage.
5. Expansion/Contraction: Account for thermal expansion by installing expansion joints or loops in runs over 20 feet.
6. Testing: Pressure-test the system at 1.5x working pressure for 30 minutes to check for leaks.
7. Safety Notes: Work in well-ventilated areas; wear gloves and eye protection. Avoid direct sunlight exposure during storage/installation to prevent warping. Consult local plumbing codes (e.g., UPC or IPC) and manufacturer guidelines for specifics.

Usage

AGM 1/2″ SCH80 CPVC pipe is primarily used for:

• Hot and Cold Water Plumbing: In residential homes for supply lines, under-sink installations, and radiant heating systems.
• Commercial Applications: Offices, hotels, and schools for water distribution where corrosion resistance is key.
• Industrial Uses: Chemical processing lines (non-corrosive), fire sprinkler systems (with appropriate ratings), and irrigation.
• Advantages: Lightweight (easier to handle than metal), silent operation (no water hammer), and long lifespan (up to 50+ years with proper installation). Not suitable for outdoor burial without protection or high-pressure steam systems.
• Maintenance: Inspect periodically for leaks; avoid freezing temperatures. Compatible with standard plumbing tools and can be retrofitted into existing systems.