Dadex Nikasi upvc Elbow 200mm

Dadex Nikasi is a premium brand of un plasticized polyvinyl chloride (UPVC) pipes and fittings manufactured by Dadex Eternit Limited, a leading Pakistani company specializing in plastic piping solutions for plumbing, drainage, and industrial applications. The UPVC Elbow 200mm is a 90-degree bend fitting designed for solvent joint (solvent weld) and push-fit (rubber ring joint) connections, primarily used in pressure-rated drain, sewer, and ventilation (DSV) systems. It facilitates smooth directional changes in pipelines while maintaining structural integrity under pressure.

This fitting complies with international standards like BS EN 1401-1, ASTM D 3034, and ISO 4435, ensuring durability, corrosion resistance, and leak-proof performance. It’s ideal for underground sewerage, stormwater drainage, and ventilation systems in residential, commercial, and municipal projects.

Key Specifications

Note: Exact specs may vary slightly by batch or region; always refer to Dadex’s official catalog or packaging for project-specific data.

Detailed Description

• Design Features:

  • Smooth internal bore reduces flow resistance and prevents clogging.
  • Thick-walled construction for high impact resistance and longevity (50+ years service life).
  • Dual-joint compatibility: Solvent weld for rigid, high-pressure joints; push-fit for flexible, maintenance-friendly installations.
  • Integral spigot and socket ends with chamfered edges for easy insertion.
  • Resistant to chemicals, abrasion, and root penetration.

• Pressure Classes (for DSV applications):

Usage and Applications

• Primary Uses:

  • Drainage & Sewer Systems: Connects UPVC pipes in underground networks for wastewater, sewage, and storm water.
  • Ventilation (Soil & Waste): Directs vent pipes in building plumbing to prevent gas buildup.
  • Pressure Piping: For pumped sewer lines or industrial effluents under pressure.
  • Common in housing societies, hospitals, factories, and municipal infrastructure.

• Installation Guidelines:

  1. Preparation: Cut pipes square, chamfer edges, clean sockets.
  2. Solvent Weld: Apply Dadex-recommended solvent cement (e.g., purple primer + cement). Insert spigot fully, hold for 30 seconds. Cure time: 15–30 min (full strength in 24 hrs).
  3. Push-Fit: Lubricate rubber ring and spigot with soap solution. Push until fully seated (audible click). No adhesives needed.
  4. Support: Space supports every 1–1.5 m; use concrete encasement for traffic areas.
  5. Testing: Hydrostatic test at 1.5x operating pressure for 10 mins (no leaks).
  • Tools Needed: Pipe cutter, deburring tool, solvent applicator (for weld); no special tools for push-fit.
  • Precautions: Avoid over-tightening; not for hot water (>60°C) or potable supply (use uPVC pressure pipes instead).

• Advantages:

  • Lightweight (1/6th weight of concrete/DI pipes) for easy handling.
  • Cost-effective: 40–50% cheaper installation than metal alternatives.
  • Eco-friendly: 100% recyclable, no rust or scaling.