Tee 110mm RAKtherm PPRc

Description

Tee 110mm

 

RAKtherm imported PPRc, Food graded third generation Poly propelene Random with Co-polymer
materials. contact 0322-3540656

 

 

What is Tee 110mm RAKtherm PPRc ?

 

The Tee 110mm RAKtherm PPRc PN 25 is a T-shaped polypropylene random copolymer (PPRc) fitting used to connect three 110 mm PPR pipes and create a branch line in hot water, cold water, and HVAC piping systems. It allows fluid flow to be divided into two directions or combined from two lines into one while maintaining the pressure and temperature performance of the piping network.

Product Description

The Tee 110mm is manufactured from food-grade PPRc material and is designed for socket-fusion welding with compatible 110 mm PPR pipes. The fitting forms a permanent, homogeneous, leak-proof joint and is suitable for potable water, HVAC, industrial water distribution, and heating systems. RAKtherm PPRc fittings imported from the UAE are designed for long service life, corrosion resistance, and reliable performance under high pressure and temperature conditions.

Technical Specifications

Key Features

• Creates a 90° branch connection between three pipelines.
• Food-grade and non-toxic material suitable for drinking water.
• Corrosion-resistant and scale-resistant.
• Leak-proof fusion-welded joints.
• High pressure capability (PN 25).
• Excellent resistance to chemicals and aggressive water conditions.
• Smooth internal surface minimizes pressure loss.
• Lightweight and easy to handle.
• Long operational life exceeding 50 years when properly installed.

Applications

Hot Water Supply Systems

Used for branching hot water distribution lines in residential, commercial, and industrial buildings.

Cold Water Networks

Creates branch connections in potable water supply systems.

HVAC Systems

Widely used in chilled water and heating water distribution systems where multiple circuits require branching.

Industrial Fluid Transport

Suitable for non-corrosive industrial liquids compatible with PPRc material.

Irrigation and Utility Networks

Used in water distribution systems requiring reliable branch connections.

Installation Procedure

1. Pipe Preparation

• Cut all 110 mm PPR pipes squarely.
• Remove burrs and clean the pipe ends.

2. Heating

• Heat the pipe ends and tee sockets simultaneously using a calibrated PPR fusion welding machine at approximately 260°C.

3. Fusion Jointing

• Insert each pipe into the tee socket to the required depth.
• Do not rotate during insertion.
• Hold firmly until cooling is complete.

4. Alignment Check

• Ensure all three branches remain aligned before the joint solidifies.

5. Pressure Testing

• After installation, perform hydrostatic testing according to project specifications before commissioning.

Usage in HVAC and Water Supply Solutions

The Tee 110mm is commonly installed at:

• Main distribution headers
• Vertical risers
• Plant room manifolds
• HVAC chilled water networks
• Boiler and heating systems
• Water storage and pumping systems
• Commercial and industrial plumbing infrastructure

It enables efficient flow distribution while maintaining the integrity of the PN 25 piping system.

Advantages

• Permanent welded connection with no leakage risk.
• No rust, corrosion, or scaling.
• Lower maintenance than metal fittings.
• Reduced friction losses due to smooth bore.
• Excellent thermal and acoustic insulation properties.
• Suitable for both concealed and exposed installations.
• Hygienic and safe for drinking water applications.

Typical Projects

• Residential apartments
• Hospitals
• Hotels
• Commercial buildings
• Educational institutions
• Industrial plants
• Central air-conditioning systems
• District hot and cold water distribution systems