Description
Upvc Red Bush 1×3/4″ AGM
AGM imported from Saudi Arab ASTM uPvc Sch-40 Pressure Fittings, Drain sewer ventilation. Distributor in Pakistan contact 0322-3540656
What is AGM upvc Red Bush 1×3/4″ ?
AGM UPVC Red Bush 1×3/4″ Sch 40 is a reducing bush (adapter) fitting from Arabian Gulf Manufacturers (AGM) in Saudi Arabia, used to connect 1-inch UPVC pipe to 3/4-inch pipe in sewerage, drainage, and low-pressure water supply systems.
Description
This red-colored UPVC bush features a 1-inch socket end (female) transitioning to a 3/4-inch spigot end (male), distinguishing it from gray pressure or white potable fittings for visual identification in non-potable applications.
lass=”yoast-text-mark” />>Made from high-quality SABIC UPVC resin, it offers corrosion resistance, lightweight design, and smooth interior for efficient flow in waste or irrigation lines.
Specifications
-
Material: UPVC (Cell Class 12454 per ASTM D1784), chemical-resistant and non-conductive.
-
Dimensions: 1″ OD (~1.315″) to 3/4″ OD (~1.050″), Sch 40 wall thickness (~0.133″ for 1″, ~0.113″ for 3/4″).
-
Pressure Rating: Up to 450 PSI at 73°F (23°C) with 2:1 safety factor; maximum 140°F (60°C).
-
Standards: ASTM D2466 for Sch 40 fittings, suitable for DWV and low-pressure use.
Installation
Clean ends thoroughly, apply AGM primer followed by solvent cement per ASTM D2855, push spigot fully into receiving socket (depth ~1-1.5″ for these sizes), and hold for 30 seconds. Ensure even cement layer for leak-proof seal; support piping per code and avoid over-tightening.
Usage
Applied in sewerage/drainage transitions, non-potable water distribution, or vent lines to reduce pipe size without extra couplings; excels in corrosive soils and low-friction flow. Not for potable hot water, gases, or pressures beyond rating—pair with Sch 40 pipes for compatibility.
Reviews
There are no reviews yet.