Turk Plast upvc Elbow 5″

Description

Turk Plast upvc Elbow 5″

Turk Plast Pipe fittings suppliers in Islamabad Pakistan contact?? +92-322-3540656.?? Elbow 5″

What is Turk Plast upvc Elbow 5″

A UPVC Elbow Truk Plast with a 5-inch diameter and Schedule 40 rating is a plumbing fitting that is designed to change the direction of a pipeline, usually at a 90-degree angle. Let’s take a detailed look at this fitting:

• Technical Specifications

  • Standard Compliance: Complies with relevant standards such as ASTM D2466 for Schedule 40 UPVC fittings.
  • Pressure Rating: Schedule 40 fittings typically handle pressures up to 450 psi, depending on the diameter and application.
  • Temperature Range: Operates effectively within a temperature range of 0??C to 60??C (32??F to 140??F).

  Material:

  • Un plasticized Polyvinyl Chloride (uPVC) – known for its durability, chemical resistance, and cost-effectiveness in plumbing applications.

  Size:

  • The Nominal Pipe Size (NPS) refers to the diameter of the pipe that the elbow is designed to connect with is “5”. The actual diameter won’t be exactly 5 inches, but close enough to allow for solvent welding.
  • Schedule 40 (Sch 40): This indicates a pressure rating suitable for cold water supply lines and drainage applications.

  • Maintenance Tips

    • Regular Inspections: Periodically check the joints and fittings for signs of wear, leaks, or damage.
    • System Cleaning: Keep the system free from debris and buildup that could obstruct flow or cause damage.
    • Pressure Testing: Conduct regular pressure tests to ensure the integrity of the system.
    • Joining:
      • Quickly insert the pipes into the elbow with a slight twisting motion to ensure even distribution of the cement.
      • Hold the pipes in place for a few seconds until the cement sets.
    • Elbow Radius (Centerline to Centerline): Around 5 inches (127mm) – This is the distance between the centerlines of the inlet and outlet on either side of the elbow curve.
    • Wall Thickness: Schedule 40 elbows typically have a wall thickness around 0.22 inches (5.6mm).

  • Connection:

    • The special PVC cement creates a strong, watertight seal between the elbow and the pipes, designed for solvent welding.

    Applications:

    • Commonly used in various plumbing and drainage applications, where a change in direction is needed:
      • Cold water supply lines (up to a certain pressure)
      • Drainage systems (waste vents, etc.)
      • Irrigation systems (depending on pressure rating)