Hydroplast sch 80 upvc End Cap 3″

Description

Hydroplast sch 80 upvc End Cap 3″

 

Hydroplast Contact 0322-3540656, Sch-80 pvc fittings, suppliers in Pakistan. Karachi, Islamabad. Hydroplast sch 80 upvc End Cap 3″

 

What is Hydroplast sch 80 upvc End Cap 3″ ?

 

The Hydroplast SCH 80 UPVC End Cap is a fitting made from un plasticized polyvinyl chloride (UPVC), designed to close the end of a 3-inch diameter pipe. It is part of the Schedule 80 (SCH 80) series, which indicates a thicker wall and higher pressure rating compared to Schedule 40 fittings. This makes it suitable for applications that require greater strength and durability.

Specifications:

• Material: UPVC (Un plasticized Polyvinyl Chloride)
• Size: 3 inches (nominal pipe size)
• Pressure Rating: Schedule 80, suitable for high-pressure applications
• Color: Typically gray
• Connection Type: Socket (glued or solvent-welded)

Features:

• Corrosion Resistance: UPVC is resistant to corrosion, making it ideal for use in various environments, including chemical and wastewater applications.
• Durability: The thicker walls of Schedule 80 fittings provide enhanced strength and resistance to impact and stress.
• Easy Installation: You can easily install the end cap using solvent cement, which creates a strong, permanent bond with the pipe.
• Lightweight: UPVC is lighter than metal fittings, making handling and installation easier.

Usage:

The Hydroplast SCH 80 UPVC End Cap is used in a variety of applications, including:

1. Plumbing Systems: To terminate or cap off unused pipe ends in residential or commercial plumbing systems.
2. Irrigation Systems: To seal the ends of irrigation pipes, preventing water loss and maintaining system pressure.
3. Industrial Applications: In chemical processing or manufacturing facilities, where a secure closure is needed to prevent leaks.
4. Wastewater Management: To close off pipes in drainage systems, ensuring that waste is contained and directed appropriately.

Installation:

1. Preparation: Ensure that the pipe end is clean and free of debris.
2. Apply Solvent Cement: Apply a suitable solvent cement to both the inside of the end cap and the outside of the pipe.
3. Join the Fittings: Push the end cap onto the pipe, giving it a slight twist to ensure an even distribution of the cement.
4. Hold in Place: Hold the cap in place for a few seconds to allow the cement to set.
5. Curing Time: Allow the joint to cure according to the manufacturer’s instructions before applying pressure or using the system.