Hydroplast sch 80 upvc Butter Fly Valve 2″

Description

Hydroplast sch 80 upvc Butter Fly Valve 2″

Hydroplast Contact 0322-3540656, Sch-80 pvc fittings, suppliers in Pakistan. Karachi, Islamabad. Hydroplast sch 80 upvc Butter Fly Valve 2″

What is Hydroplast sch 80 upvc Butter Fly Valve 2″ ?

The Hydroplast Schedule 80 UPVC Butterfly Valve in 2″ size is an imported valve designed for on/off or throttling service in various fluid handling systems. Here’s a detailed description and information about its usage:

Description:

• Material: Constructed from UPVC (Un plasticized Polyvinyl Chloride), known for its excellent chemical resistance, high strength, and resistance to corrosion, rust, and scaling. The Schedule 80 designation indicates a thicker wall than Schedule 40, allowing it to handle higher pressure applications.   
• Size: The nominal pipe size of 2″ (DN50) indicates the inner diameter that it connects with.
• Type: Butterfly Valve. This type of valve features a rotating disc (the “butterfly”) within the valve body. When you open the valve, the disc turns to allow unrestricted flow. When you close it, the disc rotates 90 degrees to block the flow. You can also position it at intermediate angles to throttle the flow.  
• Design: Typically, the valve features a two-piece or wafer-style body that installs between two flanges. The disc, usually made of UPVC or another compatible material, connects to a stem that passes through the body and links to an actuator, which can be a manual lever, gear operator, or automatic actuator.
• Sealing: The valve employs elastomeric liners, such as EPDM or Viton, to create a tight seal against the disc when closed. You fit the liner within the valve body.
• Pressure and Temperature Rating: The maximum pressure rating is often around 150 PSI (10 bar) to 235 PSI (16 bar) at 70°F (21°C), but this can vary depending on the specific manufacturer and model. The maximum service temperature is typically between 131°F (55°C) and 140°F (60°C).
• Connection Type: The valve is designed for installation between two flanges that conform to a specific standard, such as ANSI or DIN.. The valve body will have bolt holes that align with the flange bolt patterns.