Gas Clamps SAGE 6″

Description

Gas Clamps SAGE 6″

 

163-172mm, Gas Clamps SAGE 6″, SAGE Company clamps, Suppliers in Karachi Pakistan. Pipe Clips Contact 0322-3540656

 

What is Gas Clamps SAGE 6″?

 

A Gas Clamp SAGE 6″ is a larger, heavy-duty clamp used primarily to secure or repair gas pipelines or hoses with an outer diameter of about 6 inches. These clamps are critical in industrial, commercial, and utility gas systems, where pipe sizes are larger and pressures can be higher.

Description

• Size: Fits around 6-inch pipes (approximately 168–170 mm OD, depending on pipe material).

• Material:

  • Stainless steel (most common for gas service due to excellent corrosion resistance)

  • Galvanized carbon steel (for outdoor, above-ground installations)

• Design:

  • Band Clamp (SAGE)

  • Repair Clamp (with sealing gaskets)

  • U-bolt Clamp (for mounting large gas pipes to structures)

• Components:

  • Bolts & nuts (high-tensile strength)

  • Sealing gasket (usually Nitrile or EPDM rubber for gas-tight sealing)

  • Lug plates (welded or bolted for strength)

Key Features

• Withstands high pressures (suitable for gas line pressures)

• Gas-tight sealing (if repair type)

• Corrosion-resistant for underground and outdoor use

• Heavy-duty construction for industrial gas applications

• Quick and safe installation without welding (important for live gas lines)

Usage Applications

1. Gas Line Repair:

   • Sealing cracks, pinholes, or leaks on 6″ steel, cast iron, or PE gas pipes.

   • Emergency or permanent repairs without cutting or welding.

2. Pipeline Support:

   • Holding or anchoring 6″ gas pipes to walls, ceilings, or underground structures using U-bolt or saddle clamps.

3. Gas Hose Connections:

   • In very large flexible gas hoses (e.g., industrial gas delivery systems).

4. LPG, Natural Gas, and Industrial Gas Systems:

   • Used in refineries, gas utility companies, and large factories.

Important Notes

• Always use clamps specifically rated for gas service.

• Gas clamps for repair must meet standards like ASME, ASTM, ISO, or EN to ensure leak-proof performance.

• Proper torque settings must be used during installation to avoid leaks.