AGM upvc Red Tee 4×2″

Description

 Upvc Red Tee 4×2″ AGM

 

AGM imported from Saudi Arab ASTM uPvc Sch-40 Pressure Fittings, Drain sewer ventilation. Importer in Pakistan contact 0322-3540656

 

What is AGM upvc Red Tee 4×2″ ?

 

Product Overview

AGM UPVC Red Tee 4×2″ SCH 40 is a plumbing fitting manufactured by Arabian Gulf Manufacturing (AGM), a company based in Saudi Arabia specializing in PVC pipe systems. This specific product is a T-shaped (tee) fitting made from un plasticized polyvinyl chloride (UPVC), designed for non-pressure applications like sewerage and drainage systems. The “Red” designation typically indicates it’s intended for non-potable water or waste systems (e.g., drainage, sewage), distinguishing it from clear or blue UPVC used for potable water. It’s imported from Saudi Arabia and complies with international standards like ASTM D1785 for UPVC pipes and fittings. AGM products are known for durability in harsh environments, including high temperatures and chemical resistance, making them suitable for Middle Eastern climates.

Description

• Material: Rigid UPVC, which is corrosion-resistant, lightweight, and non-conductive. It’s free from heavy metals and safe for environmental applications.
• Shape and Size: A tee fitting with a 4-inch (100 mm) main run and a 2-inch (50 mm) branch outlet. The “4×2″” refers to the nominal pipe sizes it connects to.
• Color: White, signaling its use in drainage or sewerage systems to prevent cross-contamination with potable water lines.
• Key Features: Smooth internal surface reduces friction and buildup; threaded or socket ends for easy connections; resistant to UV degradation, acids, and alkalis commonly found in sewage.

This fitting is part of AGM’s SCH 40 series, which offers thicker walls for added strength compared to lighter schedules, though it’s not rated for high-pressure systems.

Specification

• Dimensions:
  • Main pipe diameter: 4″ (nominal, actual OD ≈ 4.5″ or 114 mm).
  • Branch diameter: 2″ (nominal, actual OD ≈ 2.375″ or 60 mm).
  • Wall thickness: SCH 40 standard (e.g., 4″ pipe wall ≈ 0.237″ or 6 mm; 2″ pipe wall ≈ 0.154″ or 4 mm).
• Pressure Rating: Non-pressure (typically up to 10-15 psi for drainage); not suitable for pressurized water supply.
• Temperature Range: -10°C to +60°C (14°F to 140°F), ideal for outdoor sewerage in hot climates like Saudi Arabia.
• Standards Compliance: Meets ASTM D2665 for UPVC fittings, ISO 4422 for PVC pipes, and local Saudi Arabian standards (e.g., SASO). Chemical resistance per ASTM D543.
• Packaging: Usually sold individually or in bulk; weight per fitting ≈ 0.5-1 kg, depending on exact size.
• Lifespan: 50+ years under normal conditions, with resistance to scaling and biological growth.

For precise specs, refer to AGM’s product datasheet or certificates, as variations may exist.

Installation

UPVC fittings like this are installed using solvent cement welding for a permanent, leak-proof seal. Here’s a step-by-step guide (always follow local plumbing codes and wear safety gear):

1. Preparation: Cut pipes to length using a fine-toothed saw. Ensure ends are square and burr-free. Clean and dry all surfaces.
2. Priming: Apply UPVC primer to pipe ends and fitting sockets to soften the material for bonding.
3. Cementing: Apply a thin layer of UPVC solvent cement to both pipe and fitting. Insert pipe into the tee socket, twisting slightly (about 1/4 turn) for even distribution. Hold for 30-60 seconds until set.
4. Alignment: Ensure the tee is level and aligned with the main pipe run. For sewerage, slope the system (e.g., 1/4″ per foot) to promote gravity flow.
5. Curing: Allow 24 hours for full cure before pressure testing or use. Avoid stressing the joint during this time.
6. Tools Needed: Pipe cutter, deburring tool, primer, cement, gloves, and a level.
7. Tips: Work in temperatures above 10°C (50°F). For underground installation, use appropriate bedding (e.g., sand) to prevent shifting. If threading is involved (rare for UPVC), use Teflon tape.

Improper installation can lead to leaks; consult a professional for complex systems.

Usage

• Primary Applications: Sewerage and drainage systems, including residential, commercial, and industrial waste lines. Also used for rainwater harvesting, irrigation (non-potable), and effluent disposal. The 4×2″ size is common for branching from main sewer lines to smaller drains.
• Advantages: Lightweight (easy to handle), cost-effective, and resistant to rust, making it preferable over metal in corrosive environments. In Saudi Arabia’s arid climate, it handles high temperatures and sand without degradation.
• Limitations: Not for pressurized potable water (use blue UPVC instead); avoid exposure to solvents or extreme heat. Red color helps in code compliance to separate potable from non-potable systems.
• Maintenance: Minimal; inspect for cracks or blockages periodically. Clean with water or mild detergents.