AGM upvc pipe 6″ SDR41

Description

upvc pipe 6″ SDR41

 

AGM Jeddah Saudi. ASTM uPvc pipes sdr-41 : BSS-3505 class B. Ideal plumbing materials for Drain, rain water, sewerage system 0322-3540656

 

What is AGM upvc pipe 6″ SDR41 ?

 

The AGM uPVC 6″ SDR 41 pipe is a high-quality piping solution manufactured by Arabian Gulf Manufacturers (AGM) in Saudi Arabia.¹ This specific pipe is designed for low-pressure applications, striking a balance between lightweight construction and the structural integrity needed for underground and industrial use.

Technical Specifications (6″ SDR 41)

The term SDR 41 refers to the Standard Dimension Ratio, meaning the outside diameter is 41 times the wall thickness.² This results in a thinner wall compared to SDR 26 or SDR 17, making it ideal for non-critical pressure or gravity-fed systems.

 

Feature	Specification
Nominal Size	6 inches (approx. 160mm – 168mm OD)
SDR Rating	41
Pressure Rating	Approx. 100 PSI (6.9 Bar) at 23°C
Material	Un plasticized Polyvinyl Chloride (uPVC)
Standard	Often follows ASTM D2241 or ISO 1452-2
Joint Type	Solvent Cement Joint (S/J) or Rubber Ring Joint (R/J)
Length	Typically 6 meters (standard for Saudi exports)

---

Key Applications

Despite being a “pressure” rated pipe, its thin wall (SDR 41) makes it most popular for the following:

• Sewerage & Drainage: Used extensively for buried gravity-flow sewer mains and storm-water drainage. Its smooth internal bore prevents sediment buildup and clogs.

• HVAC Systems: Specifically used for condensate drain lines and low-pressure air ventilation. It resists the corrosive nature of HVAC condensate better than metallic alternatives.

• Water Supply: These pipes suit low-pressure water distribution, such as irrigation or secondary water lines, where high-pressure surges do not occur.

• Chilled Water Systems: Some HVAC configurations use it for non-pressurized components of cooling water circuits.

Why Imported from Saudi Arabia?

AGM is one of the premier manufacturers in the MENA region.⁴ Importing this specific brand is often preferred because:

1. SABIC Raw Materials: AGM uses high-grade resin from SABIC (Saudi Basic Industries Corporation), ensuring better chemical resistance and UV stability.

2. Standards Compliance: Manufacturers produce these pipes to meet strict international standards (ASTM, ISO, and SASO), ensuring their reliability for project approvals.

3. Durability: The non-conductive nature of uPVC and its immunity to galvanic corrosion prove vital for the soil conditions found in many coastal or desert regions.

Comparison: 6″ vs. 8″ (SDR 41)

• Capacity: The 8″ pipe handles significantly higher volumes of waste or water but requires more trench space and structural support.

• Wall Thickness: Because the SDR remains 41, the 8″ pipe will have a thicker absolute wall than the 6″ pipe to maintain the same ratio, making the 8″ pipe heavier per meter.

• Usage: Builders rely on the 6″ pipe as the “workhorse” for building connections, while they generally reserve the 8″ pipe for main collector lines.