Turk Plast upvc Elbow 2″

Description

Turk Plast upvc Elbow 2″

 

Turk Plast Pipe fittings suppliers in Islamabad Pakistan contact +92-322-3540656. Elbow 2″

 

What is Turk Plast upvc Elbow 2″

 

This high-quality, 90-degree elbow 2″ fitting is designed for use in pressure plumbing applications.
It is manufactured from un plasticized polyvinyl chloride (uPVC), which is known for its exceptional strength, durability, and resistance to corrosion and chemicals.
The sch 40 designation indicates a standard wall thickness suitable for handling pressure within a plumbing system.

Features:

• Material: uPVC (Un plasticized Polyvinyl Chloride)
• Size:2″ Diameter (nominal) – Refer to manufacturer’s specifications for exact dimensions.
• Schedule: Sch 40 – Designed for pressure applications
• Angle: 90 Degrees
• Color: White (typical for uPVC fittings)

Applications:

• Pressure plumbing systems for potable water, irrigation, and industrial applications (verify suitability with manufacturer for specific use)
• Changing the direction of pipes in a plumbing system while maintaining pressure integrity
• Installation Instructions:
  1. Cutting: Use a fine-toothed saw or a plastic pipe cutter to achieve a clean, straight cut on the pipe.
  2. Deburring: Smooth out any rough edges or burrs on the cut end of the pipe to ensure a proper fit.
  3. Cleaning: Clean the ends of the pipe and the inside of the elbow fitting with a UPVC cleaner to remove dirt and grease.
  4. Cementing: Apply a uniform layer of UPVC solvent cement to both the pipe end and the inside of the elbow fitting.
  5. Joining: Push the pipe into the fitting with a slight twisting motion to evenly distribute the cement. Hold the joint for a few seconds until it sets.
  6. Curing: Allow the joint to cure for the recommended time before pressurizing the system, following the cement manufacturer’s instructions.